Cruiser Head (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

ChaserFJ60 said:
I'm curious on what other items might be needed by the FJ60 community.

I was thinking about making optimized cross bars for FJ60's who use roof top tents. I think its a little silly that I have to use my 100lb roof rack to mount my 130lb roof top tent. The goal would be to make the cross bars as light as possible as well as low as possible. Most full roof racks have an unnecessary number of crossbars that are completely useless to holding up the weight of a roof top tent are are simply just added weight. The problem with Yakima crossbars and the like are that they mount too high up compared to full rack systems which are too heavy. Low and light would be the name of the game. Anyway I have more features I would include in the cross bar system. Its really something I want and am going to make for myself because I can but I'm curious if anyone else would like such a system in an already diluted market.
No unnecessary weight, low as possible, light as possible.
Click to expand...
Interested! I’m using Yakima 1A towers and round crossbars currently. I do have an awning and don’t have a RTT but I’d like a minimal solution that sits nice and low.
 
All items are 15% off until December 26, 2021!

www.etsy.com

FJ60Solutions - Etsy

Shop FJ60 Solutions by FJ60Solutions located in Texas, United States.
www.etsy.com www.etsy.com

logoconcept2png.png
 
Last edited:
Trying out my "new" 3D scanner. Does not work well at all for small parts, AT ALL. Kinda disappointing, but expected. I can use this scanner to model and scale new bracket locations on my computer. There's like no support for the scanner that I bought online, so im stuck using Microsoft developer demo programs lol. Pretty cool I guess

www.etsy.com

FJ60Solutions - Etsy

Shop FJ60 Solutions by FJ60Solutions located in Texas, United States.
www.etsy.com www.etsy.com

scan2.JPG
scan3.JPG
scannn.JPG
 
Last edited:
ChaserFJ60 said:
Trying out my "new" 3D scanner. Does not work well at all for small parts, AT ALL. Kinda disappointing, but expected. I can use this scanner to model and scale new bracket locations on my computer. There's like no support for the scanner that I bought online, so im stuck using Microsoft developer demo programs lol. Pretty cool I guess

View attachment 2878708View attachment 2878709View attachment 2878710
Click to expand...
So when are the FJ60 solutions replacement grilles coming out?
 
dbbowen said:
So when are the FJ60 solutions replacement grilles coming out?
Click to expand...
If he does those, I'd be hard pressed to make up my mind between a good reproduction and the @kelly saad steel grilles.
 
@dbbowen Probably not anytime in the near future as grilles are still relatively available online. This scanner does not have the quality requried to just rescan and 3D print something. I have to scan something, Use the 3D scan as a reference and reconstruct whatever it is I would want to make.

What im using is literally just an X-Box one kinect :rofl:
 
Here's a perfect example of what a 3D scanner is good for. On one project i'm exploring in, we can see how far off my initial measurements for a roof gutter bracket were from my scan. This 3D scan of the FJ60 roof corner allows me to build a gutter bracket that compliments the curvature of the FJ60's roof. Its not a perfect scan but it definitely gets the point across during the design phase.

Gutter.JPG

www.etsy.com

FJ60Solutions - Etsy

Shop FJ60 Solutions by FJ60Solutions located in Texas, United States.
www.etsy.com www.etsy.com
 
I'm jumping all over projects right now, I started to make an FJ62 Bezel but the one I have is too cracked for me to really reconstruct it any further. this project is gonna be on pause until I find a better sample bezel to reconstruct off of. On my reference piece the top rim is cracked out everywhere a screw goes, and the ash tray area is completely gone.

boop.JPG
 
ChaserFJ60 said:
I'm jumping all over projects right now, I started to make an FJ62 Bezel but the one I have is too cracked for me to really reconstruct it any further. this project is gonna be on pause until I find a better sample bezel to reconstruct off of. On my reference piece the top rim is cracked out everywhere a screw goes, and the ash tray area is completely gone.

View attachment 2884231
Click to expand...
I’d offer mine but it’s pretty cracked.

I’ll definitely buy one of your repros once you reach that phase.
 
ChaserFJ60 said:
I'm jumping all over projects right now, I started to make an FJ62 Bezel but the one I have is too cracked for me to really reconstruct it any further. this project is gonna be on pause until I find a better sample bezel to reconstruct off of. On my reference piece the top rim is cracked out everywhere a screw goes, and the ash tray area is completely gone.

View attachment 2884231
Click to expand...
I'd offer up mine, which has repaired cracks but is intact, but my 62 is my DD and I have all the switches and extra stuff mounted on the bezel. Wish you were closer so I could just bring it to you for a couple days....
 
ChaserFJ60 said:
I'm jumping all over projects right now, I started to make an FJ62 Bezel but the one I have is too cracked for me to really reconstruct it any further. this project is gonna be on pause until I find a better sample bezel to reconstruct off of. On my reference piece the top rim is cracked out everywhere a screw goes, and the ash tray area is completely gone.

View attachment 2884231
Click to expand...
Mine has some cracks, but let me check and see if it's at least intact enough to get the model. I'm in Arlington, so I could potentially drop it off to you.
 
My plastic supplier added new colors of ASA, which is the only material I use as of now because of its high UV and temperature resistance.
If there's a large enough demand for a different color to be added I may add it to my line up.

Most parts are best in the black plastic, I know of some that would look nice with the #3 Gray.
COLOR.png
 
ChaserFJ60 said:
My plastic supplier added new colors of ASA, which is the only material I use as of now because of its high UV and temperature resistance.
If there's a large enough demand for a different color to be added I may add it to my line up.

Most parts are best in the black plastic, I know of some that would look nice with the #3 Gray.
View attachment 2892992
Click to expand...


ill take #3 GREY Chase please ,

thanks !
 
You must log in or register to reply here.

Similar threads

T
Aftermarket grill and headlight bezel quality
Replies
13
Views
1K
Spike Strip
Spike Strip
Mike83FJ60
60 series dash bezel without ashtray
Replies
18
Views
2K
Mike83FJ60
Mike83FJ60
N
62 Instrument Bezel
Replies
8
Views
975
Turd Fergusson
Turd Fergusson
pavementfan60
Just washed my cruiser bumper and headlight bezels
Replies
1
Views
576
FJ404345
FJ404345

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom