Conversion from Nav to Non-Nav Climate Control Panel (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

===========================

I bought a car multimedia for the land cruiser 100 with this console from the following link. it works with my car perfectly.

android autoradio headunit car multimedia head unit stereo gps lc100 toyota land cruiser 100 lx470 lexus lx 470 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007
well, I don't want to digress from @macmann's well-intentioned thread, but I'm compelled to respond specifically on the Canavie assertion: it doesn't work perfectly (at least not yet) in my 2003 LC w/factory GEN-03 NAV. while the android-based features expand entertainment & access to vehicle info, it took extra effort (well beyond the installation videos) and risk of damaging electrical components (due to the lack of written installation instructions & connectivity guidance) to get it to work the way it does. my installation notes highlight the mysteries of the extra wires and some annoying (to me) functionality, and I've yet to receive technical guidance from the folks at Canavie that might resolve them.

so, please share what you did to get your installation to work *perfectly* and I'll volunteer to give it a try. If this all works, it might get others on the Forum to show more interest

[respond on this thread: Lexus/Toyota Factory Navigation to 10" screen upgrade]

we now return to our regularly scheduled program...
 
Last edited:
Hello,

An old thread here but about to get back into LC world with an 04. Any of you have good updated information on doing the lower HVAC control.
 
 
I know old thread but...

Just got an 07 HDFTE GCC spec a/t gated VX trim with that actual panel look.

however my climate control panel specifically the temperature control can't be adjusted. also lights are too dim.

any leads where I can source parts?

Thanks!
 
you probably need a new heater integration circuit board for knob control, and new bulbs. LED on later units, not on early units.
Check the white connector with red black and white wires to the knob, bottom of pic. The red and black round things are bulbs. There's 2 or 3 different parts involved. Main circuit board is
probably 84014-60190, like this ebay link ebay.com/itm/185674430455

could also be the plastic housing, that's where the shaft of the knob sits with it's 3 wire assembly.
That part number is55902-60110 partsouq.com/en/search/all?q=55902-60110
IMG_20180430_092914.jpg
 
you probably need a new heater integration circuit board for knob control, and new bulbs. LED on later units, not on early units.
Check the white connector with red black and white wires to the knob, bottom of pic. The red and black round things are bulbs. There's 2 or 3 different parts involved. Main circuit board is
probably 84014-60190, like this ebay link ebay.com/itm/185674430455

could also be the plastic housing, that's where the shaft of the knob sits with it's 3 wire assembly.
That part number is55902-60110 partsouq.com/en/search/all?q=55902-60110
View attachment 3367619
Thank you for the information
 
f422ad7b-95f5-4ad8-865e-508969913803.jpeg
Hi everyone

I have a complete manual air condition control unit for sell for the Land Cruiser 100 Series Facelift (2002-2007), because i sold my rig and switched back to the touch screen unit due the new owner didnt want to pay me some extra for the rare conversion. If there is someone who would like to buy and install it in his rig, here you have the opportunitiy... includes air vents, LCD for the board computer, lower air condition control unit, and original upper radio (not the one on the pucture)
Wasnt hard to install. Jerryb helped me out (thanks again!)
im from switzerland europe and would ship it worldwide. Its also listed on ebay but i would give a discount on the ih8mud users. 850$ plus shipping
 

Users who are viewing this thread

Back
Top Bottom