Can I replace this on my own, or is a diesel specialist required.

[oz80T]

Ive attached a link below, essentially the line drawn to the screw is leaking and i need to find a part or some information about it to replace or fix with seal sizes etc.

the leak is coming from the end under the cap cover where the threads are, on the FSM its labelled Dash port?
Really struggling to get a P/N or an actually name for the Screw/nut and would love some help..

Thank you in advanced.

Repost new section, fuel pump leak

Hey guys reposting to get some new eyes. I've found the leak is coming from where the red arrow is situated. Can't tell if it's the seal or something else. Any advice? Link with info below. https://forum.ih8mud.com/threads/diesel-pump-leak-1hdt-gxl.1331687/ Thanks!

forum.ih8mud.com

 

[jonheld]

Really struggling to get a P/N or an actually name for the Screw/nut and would love some help..

Go to www.partsouq.com and enter your VIN. All parts and part numbers will be available to you.

 

[mudgudgeon]

Go to post 15 in this thread

Thread 'Injector Pump Solenoid Question' Injector Pump Solenoid Question - https://forum.ih8mud.com/threads/injector-pump-solenoid-question.1301805/

Screen shot below is from Toyodiy, but as mentioned above, the same diagrams are available on partsouq.com

I can't find any reference to a seal, or oring.
Wondering if it relies on a tapered thread

 

[oz80T]

Go to www.partsouq.com and enter your VIN. All parts and part numbers will be available to you.

Thanks for this, I tried and unfortunately could find anything past the main assembly or the nuts and screws spread out. Don't know why it was so difficult.

 

[oz80T]

Go to post 15 in this thread

Thread 'Injector Pump Solenoid Question' Injector Pump Solenoid Question - https://forum.ih8mud.com/threads/injector-pump-solenoid-question.1301805/

Screen shot below is from Toyodiy, but as mentioned above, the same diagrams are available on partsouq.com

I can't find any reference to a seal, or oring.
Wondering if it relies on a tapered thread

View attachment 3657703

Thank you mate I had major difficulty finding something like this. I have a hdj80r 1992, any idea if the pumo has changed from 1992-1995? Thanks!

 

[oz80T]

The good news is I've found the part, I've had mixed recommendations on what my next step is tho.

I'm wondering if this is something I can do myself or I have to go to a specialist Injection place.

I believe the pump has to be pulled out of car (Labor expensive)
Then tested and adjusted and put back In (more expensive)

I've had 1 diesel specialist tell me it's the best way.
Another tell me it's doable but I wouldn't recommend
And another say might aswell rip out rebuild and do more boost which I'm happy with my current power.