buy me some spray paint and this is what happens.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I like the grey rim idea...I know your buds have black but grey would be a better compliment...just say'in...btw i did not know you were fond of the blue hairs
i am thinking that dark grey or the grey that is on the rear bumper is the way to go....

and yes, the wrinkled hands of Martha Stewart give me a woody.....something is wrong with me.
 
painting:clap:

alright, normally now....

painting:
Rustoleum High Enamel Matte black


Looks great, goes on glossy, and dries matte (im sure thats same for all spray cans)

after prepping. i used a air compressor to blow the rim free of dust/dirt, or anything that might be laying on the primer (please make sure the primer is dry, you might make a mess if its not)

Hey 2000...

I am planning on taking on this project over the next couple of days. Question, I cant tell from the picture. Did you break the bead on the tire in that photo before you used the index cards? I was looking at my BFG's and with the tire fully deflated, I do not get really good access to the edge of the rim. If so, what method did you use to re-seat the bead? Thanks!
 
Hey 2000...

I am planning on taking on this project over the next couple of days. Question, I cant tell from the picture. Did you break the bead on the tire in that photo before you used the index cards? I was looking at my BFG's and with the tire fully deflated, I do not get really good access to the edge of the rim. If so, what method did you use to re-seat the bead? Thanks!

here is another write up if you take the tires off. It was an easy job and even if you dont take the tires off the rim i would use the epoxy paint.


https://forum.ih8mud.com/100-series-cruisers/278453-painting-your-rims-step-step-pics.html
 
Mxndrnks said:
Hey 2000...

I am planning on taking on this project over the next couple of days. Question, I cant tell from the picture. Did you break the bead on the tire in that photo before you used the index cards? I was looking at my BFG's and with the tire fully deflated, I do not get really good access to the edge of the rim. If so, what method did you use to re-seat the bead? Thanks!

Well,

When I did my rims I had the michelins on. I did not air them down, just notecarded. I'm not sure about tue AT bead, but tue KM-2 bead wont let you slide anything in there.

You may have to experiment. Use Vasonline on the tire, when you are done wash it off. It's cheap and easy. I did it on the emblems on the wheels.
 
Thanks man! I am going to give it a shot without unseating the bead. With BFG 295's, the tires completely deflated, I can get the index cards in there. Tail Strip II is already on and pulling the old paint off.... so no turning back now! If I can get the edge of the rim good enough, then I will pop the bead loose and redo it..... Graphite here I come......
 
Thanks man! I am going to give it a shot without unseating the bead. With BFG 295's, the tires completely deflated, I can get the index cards in there. Tail Strip II is already on and pulling the old paint off.... so no turning back now! If I can get the edge of the rim good enough, then I will pop the bead loose and redo it..... Graphite here I come......

Or go to my powdercoater;)
 
Well, I finished up! Thanks for the write up! It helped a lot! I really love the way they came out. I am not sure if I will stay with the graphite or if I will go black....The Graphite is really close to the body color and black might be a better choice for me....

But again thanks for the write up!
 
Well, I finished up! Thanks for the write up! It helped a lot! I really love the way they came out. I am not sure if I will stay with the graphite or if I will go black....The Graphite is really close to the body color and black might be a better choice for me....

But again thanks for the write up!

..and the pics are where???
 
STOP IT..... your making me play with MS paint and it’s going to have dire consequences

268843_10150716990170301_903980300_19333162_3207593_n.jpg
 
yup, I made them, with my industrial logitec optial mouse ;)

No rocks or trees here, I want then so people can get into my car, and to have a jacking point when she belly outs on a dune. I have learnt that the kick out work really well as jacking points becuase most of the slider is in the dune... so I want 2 of them.

I am also sick to death of people opening thier doors into my car!!!!!
 
yah well its my :princess:, you dont see me opening my door into the face of random peoples daughters in parcking lots......

Its just like when people ask, can I drive your hundy.. I say sure you can, if I can take your dauther for a ride. :flipoff2:
 
Thanks. I am waiting on some new center caps to come in so I can paint them up. I lost one on the way to MOAB this year and another one is broken. I think it looks good with the chrome lugs and sombrero on the graphite...
 
Back
Top Bottom