Building a belt sander
- Thread starter Mace
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
That is exactly what I was thinking. There are also a wide range of grits to work with.
- Thread starter
- #23
Ahh.. Materials start streaming in..
Box of 2", 3" and 4" billet and bearings for the drive, tension/tracking and idler wheels
4" wil be the drive wheel
3" is the tracking/tension wheel
and the 2" billet makes the idler wheels and will also be cut to make the Belt drives..
Also, the bearings aer 1.25" OD .5 ID fully sealed bearings.. Less than $10 for all of them off ebay
Box of 2", 3" and 4" billet and bearings for the drive, tension/tracking and idler wheels
4" wil be the drive wheel
3" is the tracking/tension wheel
and the 2" billet makes the idler wheels and will also be cut to make the Belt drives..
Also, the bearings aer 1.25" OD .5 ID fully sealed bearings.. Less than $10 for all of them off ebay
