NLXTACY
Wits' End
Fan, clutch, belts and shroud need to come out. Assuming no drama it could all be done in 2-3hrs. In fact this was the first time I ever had issues doing it.
Bolt on turbo kit (7 Viewers)
- Thread starter scottryana
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Fan, clutch, belts and shroud need to come out. Assuming no drama it could all be done in 2-3hrs. In fact this was the first time I ever had issues doing it.
NLXTACY
Wits' End
Not direct but there is a blend door there so I think a skinny/bendy vacuum attachment could be made to work.
NLXTACY
Wits' End
Iād have to look it up but it was in Dissentās thread called parallel condenser.
mudgudgeon
Resident galah
Fan, clutch, belts and shroud need to come out. Assuming no drama it could all be done in 2-3hrs. In fact this was the first time I ever had issues doing it.
Cheers man
Was your issue having the OCD kick in? Or something else?
NLXTACY
Wits' End
Itās not having it in check. Iām forced to use this as a marketing vehicle so itās very easy to give in to the impulses because it needs to look the part. Besides the absolute need to baseline and PM has always been strong.
I did say meth was the answer. Now link up the pump to an OEM switch for the win.
jjdeneen918
SILVER Star
So is this methanol injection thing one of your ancillary kits you will offer to complement your pending turbo kit? 
NLXTACY
Wits' End
So is this methanol injection thing one of your ancillary kits you will offer to complement your pending turbo kit?
I donāt know honestly. Iāll know more once Iām done experimenting.
NLXTACY
Wits' End
Got the Ron Davis Racing radiator back from anodizing. I almost went with black but decided against it because it will show any and all scratches. Went with a clear anodize and happy I did. This thing looks fantastic. All of the grain of the aluminum stayed but the color is very even all the way around. Its really hard to explain but you need to see to appreciate. And no thats not me. I'm a foot taller and crazy jealous of his hair 
Got the Ron Davis Racing radiator back from anodizing. I almost went with black but decided against it because it will show any and all scratches. Went with a clear anodize and happy I did. This thing looks fantastic. All of the grain of the aluminum stayed but the color is very even all the way around. Its really hard to explain but you need to see to appreciate. And no thats not me. I'm a foot taller and crazy jealous of his hair
View attachment 2008910View attachment 2008911View attachment 2008912
Hot damn thatās purty. When they anodize it I assume they dipped it in a big tank so all the fine should be all anodized too. If thatās the case then thatās bees knees!
NLXTACY
Wits' End
Military contract work so massive tanks.
Your nipples are very...pert. And you have 2 ?!
NLXTACY
Wits' End
@Bambusiero that photo is the radiator upside down. The M14x1.0 fittings are for the trans lines and the other is for the drain petcock.
Ah, I see. Was a little confused about what I was seeing. Thanks.
NLXTACY
Wits' End
All of the turbo intake tubes are are either done or about to be done as of today. These three pieces will be going out to be powder coated in a black wrinkle finish on Monday.
NLXTACY
Wits' End
The stupid wastegate FINALLY showed up so that the shop can test fit and properly jig the downpipe for the turbo and they had a couple of small design suggestions and I accepted all of them. Production on these start now and should start coming off the assembly line mid-week.
Ugh just want to see these in all of your hands!
Ugh just want to see these in all of your hands!
Rivman1243
SILVER Star
I was afraid to scroll down and see what was in your picture
NLXTACY
Wits' End
Oil drain hoses for the turbo kits are just about done. The 45Ā° ends that arrived were the wrong ones so had to be reordered. These will be done by Monday.
NLXTACY
Wits' End
I had the shop make me up a post turbo elbow with a welded in 1/8ā bung for the methanol nozzle. This is just for me and just to test out a potential methanol kit so donāt get too excited just yet 
I had the shop make me up a post turbo elbow with a welded in 1/8ā bung for the methanol nozzle. This is just for me and just to test out a potential methanol kit so donāt get too excited just yet
View attachment 2009354
Donāt get excited about a methanol kit !?!? WAAAY too late for that. When can we get one? Lol
