- Thread starter
- #2,441
What elevation was that?
Did someone say dyno pictures? 121.5 HP of japanese tractor!
Bolt on turbo kit (17 Viewers)
- Thread starter scottryana
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
A little shy of 6k IIRC.
This guy parties.
NLXTACY
Wits' End
Sooooooo...
Technically I picked up Dylan’s truck. Everything good to go. Stage one is complete, hurdle overcome. Now 4pm, 6 hours late, but made it to Weistec Engineering. I’m too late. They tried holding the spot for me but they have a customer’s crazy built Aston Martin that they couldn’t push back anymore even though they did try for me.
The shadows in the second pic are of my brother and I crying.
I tried guys, I really really tried but this truck is officially NOT getting a pre-turbo dyno.
So off to AZ where I’m now not going to arrive til well past midnight. Ugh.
Technically I picked up Dylan’s truck. Everything good to go. Stage one is complete, hurdle overcome. Now 4pm, 6 hours late, but made it to Weistec Engineering. I’m too late. They tried holding the spot for me but they have a customer’s crazy built Aston Martin that they couldn’t push back anymore even though they did try for me.
The shadows in the second pic are of my brother and I crying.
I tried guys, I really really tried but this truck is officially NOT getting a pre-turbo dyno.
So off to AZ where I’m now not going to arrive til well past midnight. Ugh.
damn govmt shutdown!!!!!
Any initial #'s ? Love to hear how you hooked up with the Weistec guys.... I'm hoping to do their stage 3 Sc'er on the Merc once a solution is resolved for enough fueling to combine with my current E85 setup....
safe travels
E
safe travels
E
ugh !!! that's brutal.....sorry to hear man.
NLXTACY
Wits' End
Literally right now arrived in Flagstaff. It’s now 4:43am local time. F’ing traffic was miserable. Night all!
thatcabledude
GOLD Star
Can we get an update?
thatcabledude
GOLD Star
NLXTACY
Wits' End
So much for sleep
Damn sunrise...
So much for sleep
No rest for the weary !!
Replaced my hood struts today. Spent a bunch of time staring at the hole for the turbo. Then ran into a random guy at the car wash and he asked me about my 80. He has one too. Told him I was pondering an overhaul and he asked if I was going to add the WitsEnd turbo. Well I sure hope so!
NLXTACY
Wits' End
Somehow I doubt you're going to be sitting on themyay! Maybe I won't be sitting on these
Having work done on my engine in prep for the possibility of getting in on this. Worst case things run a little better, a little longer. Best case? TURBO TIME
NLXTACY
Wits' End
Spent 12 hours today at the shop getting everything torn apart. Could have gotten a bit further but I was doing a lot of photography and documenting every step.
I did find a handful of things that I need to adjust to the kit that I ran into while installing the kit as it is right now. I’m including some vacuum hose pieces and some Toyota FPIG because I’d rather see folks use the good stuff.
Today was along day but tons accomplished and tomorrow gonna check of a few more pic pieces so I can into production with the last bits.
Where things sit right now
I did find a handful of things that I need to adjust to the kit that I ran into while installing the kit as it is right now. I’m including some vacuum hose pieces and some Toyota FPIG because I’d rather see folks use the good stuff.
Today was along day but tons accomplished and tomorrow gonna check of a few more pic pieces so I can into production with the last bits.
Where things sit right now
Last edited:
NLXTACY
Wits' End
You know when you have a truck that isn’t yours and you need to remove the wheel but there are wheel locks on the wheels but no lock in site? You know when your first instinct is to just pound a slightly smaller socket over the lock and just thread it off that? You when you realize you can’t do that because the wheel design is such that there is very little room between the lugnut/lock to get a good socket over it? You know when you finally give up and you just roll over the welder and a spare socket and you just go to town on it?
Yeah it was that kind of day. Sorry Dylan, I’ll replace the lugnut
Yeah it was that kind of day. Sorry Dylan, I’ll replace the lugnut
yay! Maybe I won't be sitting on these
You were a big topic of conversation at our get together yesterday. All in a good way.
NLXTACY
Wits' End
That’s good to hear. I’m getting more and more exited about this. So far everything has gone fairly smoothly. My plan for this being a near bolt on affair is slowly being realized. I have a fellow mudder helping out, who is interested in the kit, and it’s been good to hear his feedback yesterday.
