I contacted the company who makes them, and he said it wouldn’t fit. Not sure if that was because he didn’t want any issues and just said no to be safe, or if they actually don’t.
You should try them and let me know how you go
Best Upgrades for Under $100 (200-Series) (2 Viewers)
- Thread starter lifeofreilly
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
You should try them and let me know how you go
I contacted the company who makes them, and he said it wouldn’t fit. Not sure if that was because he didn’t want any issues and just said no to be safe, or if they actually don’t.
You should try them and let me know how you go
Maybe I can link up with someone who didn't install their passenger side armrest and we can hold it up to the door and find out. Bit cheaper that way
Three posts above yours someone with a 2011 says he has them installed. There's also a link to a walk around video in his sig and you can see them installed. That's on a 2011, so should be good for a 2008-2015. Not sure about 2016+. Based on that I just ordered a set.
Best Upgrades for Under $100 (200-Series)
Trivial paper towel holder thing but a solid camping accessory. No mods, slot it into the seam, quarter turn, and it's nicely hung up out of the way but in easy reach. Couple knots on the bungie to shorten it up. Take off the little cap nubs on the hook. https://a.co/d/6InCrzB 🤯
forum.ih8mud.com
If this is what the door on a 2016 looks like, I could see why it wouldn't work. There is all that trim at the top radius of the door card.
Three posts above yours someone with a 2011 says he has them installed. There's also a link to a walk around video in his sig and you can see them installed. That's on a 2011, so should be good for a 2008-2015. Not sure about 2016+. Based on that I just ordered a set.
Best Upgrades for Under $100 (200-Series)
Trivial paper towel holder thing but a solid camping accessory. No mods, slot it into the seam, quarter turn, and it's nicely hung up out of the way but in easy reach. Couple knots on the bungie to shorten it up. Take off the little cap nubs on the hook. https://a.co/d/6InCrzB 🤯
If this is what the door on a 2016 looks like, I could see why it wouldn't work. There is all that trim at the top radius of the door card.
Good catch, I totally missed that. Wonder if the black armrests would look weird against a tan interior..
Clip on USB fan. More of a camping hack than a vehicle mod but it's great when sleeping inside the LX.
Hey mark71 how bulky did it make your wheel? Mine is falling apart but not ready to droop $800+ on a new one.
Didn't really make much difference, the leather is thin.
Still one of my favorite mods (after my drawers and bumper).
I wrapped mine too and it's not bulky at all -- If I got another 2008 200 today, I'd order the wrap asap even if wheel was in perfect condition.
Did you buy from the same company? Still waiting on mine.
Would this work on an LX570? Not listed on their page, but I'd imagine it's pretty darn similar to the LC?
FJRanger
SILVER Star
I don’t see our year Sienna on their website, but planning on calling.
One thing I noticed from their pictures none seem to have the thumb rest at the 4 and 8 o’clock positions that our Sienna does.
Please let us know what they say!
"Do the '200 Series' One Stone Armrests fit a 2016+ LX 570?"I contacted the company who makes them, and he said it wouldn’t fit. Not sure if that was because he didn’t want any issues and just said no to be safe, or if they actually don’t.
You should try them and let me know how you go
This is a question that has troubled me for some time -- so much so that I also contacted the company back in January, and sent some photos at their request. Their answer was essentially some combination of "we're not quite sure" and "it might not look right."
As a sucker for punishment, I went ahead and ordered a pair last week, and just received them. In my assessment, they *do* fit. There is some variation in the surface, given the woodgrain and metallic trims, but given the flex of the armrests and the areas covered by tape, I think there is good contact. (I'll update this post later if they fall off...
)As for how they look, I doubt everyone will have the same perspective -- but I'm happy with them. I'm going to do a test to see if my wife even notices they're there.
Watching this with keen interest, if they work and don’t fall off, my 600km weekly commute will be enhanced.."Do the '200 Series' One Stone Armrests fit a 2016+ LX 570?"
This is a question that has troubled me for some time -- so much so that I also contacted the company back in January, and sent some photos at their request. Their answer was essentially some combination of "we're not quite sure" and "it might not look right."
As a sucker for punishment, I went ahead and ordered a pair last week, and just received them. In my assessment, they *do* fit. There is some variation in the surface, given the woodgrain and metallic trims, but given the flex of the armrests and the areas covered by tape, I think there is good contact. (I'll update this post later if they fall off...
As for how they look, I doubt everyone will have the same perspective -- but I'm happy with them. I'm going to do a test to see if my wife even notices they're there.
View attachment 3911379
View attachment 3911380
Might just do the drivers..
So far so good. I was in such a hurry to leave this morning (and driving actively with the windows closed, which previously wouldn't allow space to put my arm up) that I didn't even notice they were on there. So I guess I fulfilled my own "wife test"...
On the way home I used it, and it worked great. Just need to refine my muscle memory a bit for turn signals, etc. based on the new arm position. With windows down it should be essentially the same as before, but better supported.
I also do think they look like they "fit" in the car. The material is more or less an exact match for the black pebbled leather surface it's stuck to. It might not align visually with the curved finishes, but frankly I don't care.
Last edited:
Just ordered a pair, cheers mate
They were clearly designed for the LC, but if you do not care for a perfect-fit-look they seem functional enough. Personally, I would not do it in an LX but it's just me. I have them in my LC and could not bear the thought of not installing in the passenger door (even if they are rarely used there) because it would not be a match with the driver's door. Yes, I have OCD and am a sucker for OEM or OEM-like.
About the wife test, I have them in my LC for the past 2 months and my wife has NO clue they are there or were not there before. Even after an 8-hour road trip where she drove the LC for hours.
Women are just built different than us.There's a reason why they just sell them in pairs... I probably would have ordered only one if that were an option. But even with my more limited levels of OCD, I'm not going to leave the matching one in the box.
No sign of any issue with adhesion after 1.5 weeks with some large variations in temperature and humidity -- I'm thinking my aesthetically obtuse LX brethren should be in the clear with these.
So, I installed these in the LX. I only installed the drivers side (Aussie so RHD). I installed the left side armrest onto the right door as to me it fitted better, and did some very minor trimming.
To me, biased, it is awesome and could be a factory thing. It fits nicely. But might not be for everyone. I think it will be a game changer for comfort on long drives for me.
To me, biased, it is awesome and could be a factory thing. It fits nicely. But might not be for everyone. I think it will be a game changer for comfort on long drives for me.
I got this on AliExpress for my 09 LX570, they look better imo than one stone and is cheaper. They might not be as comfortable but I think they look more OEM
