Does the 2011 LC require a "CAN Bus bulb" ? The website suggests "newer vehicles" may
Best Upgrades for Under $100 (200-Series) (1 Viewer)
- Thread starter lifeofreilly
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Does the 2011 LC require a "CAN Bus bulb" ? The website suggests "newer vehicles" may
TheGrrrrr
GOLD Star
Hadn't seen this posted, but it's my new favorite pressure washer accessory (not necessarily this exact one, but any like it):
Amazon product ASIN B07Y14V7J1
Amazon product ASIN B07Y14V7J1
scottm
SILVER Star
My truck is only a day old, and already I'm getting sucked into these "must have" things!
Mines still on a boat from Japan and I have parts waiting to be put on it already. Joining this forum should come with some type of disclaimer.
Gemini phone mount for 2008 - 2018 is the best around. Fits perfectly and doesn’t block a vent like the clip-ons do.
www.cravenspeed.com
Gemini Phone Mount for 2008-2022 Toyota Land Cruiser
The best cell phone mount built specifically for your 2008 to 2022 Toyota Land Cruiser.
www.cravenspeed.com
wiseinvestor
GOLD Star
Disclaimer: Buy 3 nice gifts for wife and stash in garage or vehicle. If she gets home before you on parts delivery days.... use to distract from pallet in driveway.
bloc
SILVER Star
Truly living up to half of your username with this one.. just brilliant.
This little guy!
Gemini phone mount for 2008 - 2018 is the best around. Fits perfectly and doesn’t block a vent like the clip-ons do.
Gemini Phone Mount for 2008-2022 Toyota Land Cruiser
The best cell phone mount built specifically for your 2008 to 2022 Toyota Land Cruiser.
Can you post a pic of where this goes and how it ends up?
@Bajaknot Also curious to see this
ProClip Phone holder. The best I have used. I have bought one for the right side of the nav screen. It looks great, doesn't cover the vent, and as well doesn't cover start/stop push button if mounted on the left.
Got this for my 7 yr old son for long trips when he nods off. More surprisingly, my older daughter loves this thing too and will vie for it. It's adjustable for adults and I'm now thinking I rather lounge in back than drive...almost.
Amazon product ASIN B0884QWSGF
More expo, just got this as a booster and off-road platform for my stock bottle jack. Works great at a 2" boost which is just right for my taller 35" tires
Amazon product ASIN B07TYCFM6T
Amazon product ASIN B0884QWSGF
More expo, just got this as a booster and off-road platform for my stock bottle jack. Works great at a 2" boost which is just right for my taller 35" tires
Amazon product ASIN B07TYCFM6T
Anyone know if this fits with the 3rd row seats in the up position? Obviously would need to come out if you needed to use them.
I couldn't get a clearer pic than the one @ty240 posted. It's tough to see where it installs but it "plugs in" to one of the blank switch plates above your right knee. You have to pop the switch plate out with a tool they sell (I used my sons Lego Brick Separator). Required a bit more force than I expected but easy install after that.
link?
TLCA Merchandise | Toyota Land Cruiser Association
The TLCA shop. Show your TLCA spirit with some of our awesome merchandise! All proceeds go directly to benefit the Toyota Land Cruiser Association.
tlca.org
Possie Bugger
SILVER Star
Made dividers for the center console in my '21 HE. I didn't like the lack of organizing dividers and the slick plastic surfaces where everything slid around and made a racket.
it's essentially a take off of the design of the Trekpak system for Pelican cases. i attached adhesive-backed felt on both sides of a piece of corregated plastic (like stuff used for lawn signs). then cut across the corregations to make panels of the desired height with a series of 'tubes' exposed. i then attached the panels together with bobby pins through the tubes. i also put the felt on the bottom of the top tray and the bottom of the main compartment.
top tray:
main compartment:
it's essentially a take off of the design of the Trekpak system for Pelican cases. i attached adhesive-backed felt on both sides of a piece of corregated plastic (like stuff used for lawn signs). then cut across the corregations to make panels of the desired height with a series of 'tubes' exposed. i then attached the panels together with bobby pins through the tubes. i also put the felt on the bottom of the top tray and the bottom of the main compartment.
top tray:
main compartment:
Center console molle panels now available for the LC200! Secure banana mount 
www.victory4x4.com
Land Cruiser Center Console MOLLE Panel | 200 Series Land Cruiser (08-21) - Victory 4x4
Offering quality steel and aluminum goods for Toyota and Lexus 4x4s.
www.victory4x4.com
Is that a tactical banana?Center console molle panels now available for the LC200! Secure banana mount
Land Cruiser Center Console MOLLE Panel | 200 Series Land Cruiser (08-21) - Victory 4x4
Offering quality steel and aluminum goods for Toyota and Lexus 4x4s.
View attachment 2573421
