For Sale Bay Area, CA: 100 series IFS take off (shocks, springs, UCAs, hubs, steering etc)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 19, 2020
Threads
33
Messages
318
Location
Redwood City, California
Vehicle Model
  1. 100 Series
Selling a bunch of stuff from my 100 series front and rear suspension. Most of the new stuff has 15k miles on it, some stuff has more than 100k miles (factory bushes, etc)

HUBS/ STEER RACK/ CVs ARE ONLY ITEMS LEFT

-Dobsinsons extended travel front shocks #IMS59- 60786 $old
- Old Man Emu torsion bars SOLD
-Old Man Emu 864 rear spring $old
-Tough Dog 41mm foam cell rear shocks $old
-Nitrogear UCAs $old
-OEM lower control arms with new 555 LBJs $old
- 2 factory CV axles (both clicking) 1 Napa CV with 10k miles $300
-front hub/rotor/spindle assembly with recently repacked bearings $500
- front differential, open (1999- 2 pinion carrier) SOLD
-steering rack (not leaking) $300

Call or text me at 650-701-6098

IMG_4294.jpeg
 
Last edited:
I'd love those lower control arms, but I'm thinking shipping to Atlanta would be pretty nasty.

Do you have the front differential support? If so, OEM or Diff Drop? Either is fine, I have a broken bolt in mine.
 
I'd love those lower control arms, but I'm thinking shipping to Atlanta would be pretty nasty.

Do you have the front differential support? If so, OEM or Diff Drop? Either is fine, I have a broken bolt in mine.
Let me know if you’d pay $250 for the lower control arms shipped.
I do have a diff drop, saving it for a friend. I can look around and see if I have my OE diff cross member.
 
Let me know if you’d pay $250 for the lower control arms shipped.
I do have a diff drop, saving it for a friend. I can look around and see if I have my OE diff cross member.

Yep, I think that should be good. Any chance you'd part with the torsion bar bolt and anchor? I stripped one back in the day (~2009) and always have a fear of that happening again. It was insane.
 
Yep, I think that should be good. Any chance you'd part with the torsion bar bolt and anchor? I stripped one back in the day (~2009) and always have a fear of that happening again. It was insane.
I can do that. I’ll get those out soon (still in my slee cross member)
 

Users who are viewing this thread

Back
Top Bottom