cv axle

Selling a bunch of stuff from my 100 series front and rear suspension. Most of the new stuff has 15k miles on it, some stuff has more than 100k miles (factory bushes, etc) -Dobsinsons extended travel front shocks #IMS59- 60786 $400 - Old Man Emu torsion bars SOLD -Old Man Emu 864 rear spring...

2004 LC 100 91k miles. Dealer said I need both front axles replaced. Both have tears in the boot. Don't hear any clicking but I'm going to replace them anyway / DIY with OEM replacement parts. While I have the axles out is there anything else that I should look for. Thanks in advance...you...

My old man's land cruiser is in need of new cv axles but when he called the dealership they said they don't make them anymore? Only remanned ones. Anyone have experience with them? Does anyone know where we can order them? Reputable aftermarket brands? Thanks for any suggestions or help.

Just received my new CVs. Is this dent/ wrinkle/ … normal?!? It’s on both axles, no visible external damage on package, so I guess it is?

As stated, is there someone in the SLC / Payson area that can do the work for her? It's a 45 minute job in my shop but she is not here nor am I there. Thanks in advance. Casey...

See video below. 2004 LX470 w/ 250k miles. I'm trying to figure out my drivetrain clunk issue. The truck had the CV axles replaced by the dealer within the last couple of years, and I recently replaced the front diff bushings. This clunk is present both in the R-N-D shift and on in decel/accel...

I'm sure this has been discussed before but right now I am extremely frustrated on this Christmas Day after installing my third CV axle in 3 months last night only to find out today when I arrived at my family's house for festivities I have checked out the install from last night and discovered...

Hi, I just found out last night while doing an oil change that one of my inner cv boots is cracked, and has spit out a lot of cv grease. It's a 2005 GX470 with 150k miles. At 140k it had a lift done. That explains the boot issue I'm dealing with.. To keep it brief, I'm debating between buying...

New, Made In USA birfield and axle set. Fits 91-97 80 Series OEM 24 Spline Had this set as spares, but no longer need them. Retail is $950 US new plus shipping, etc. Asking $700 US shipped or $1000 CAD shipped. More info here: Ultimate CV Axle Set for Land Cruiser 80 Series ('91-'97) - 24...

First, I read through a bunch of older threads, but still had some questions. I picked up a 05, 470 with 200k miles. All four boots are ripped. The inner boot passenger side is basically completely separated and has no grease left in it. In choosing not to reboot, but instead install need CV...

I have it all back together and theres a small gap between the cv and the housing that is pissing out oil. How far do I need do dismantle it to fix this? If I take the snap wring and the flange off and then bash it with a hammer and a block of wood will that get it in or do I need to pull it...

McGeorge has CVs on a good sale so picking up a couple to change out this weekend. https://toyotaparts.mcgeorgetoyota.com/oem-parts/toyota-cv-axle-left-right-front-4343060040 I've watched some videos and read through some threads here. Any recommendations on parts to switch out while I'm doing...

Hey all, well the time has come to replace my front CVs, shortly after the install of the Dobbinson lift both boots ripped. I will say I’m not totally contributing it to the lift as they look relatively worn, but it certainly is suspicious. For reference I installed the 2.5 with control arms...

Team - 235k, just had CV boots/axle/front bearings replaced by my good friends Les and Schwab. The job and time required are above my paygrade, so didn't even want to try. This felt like a pretty straightforward decision. Now - experiencing a very specific side effect that did not exist...

Hi y'all, Figured I'd share some lessons learned on disconnecting the CV axle "the easy way" and re-visit some previously discussed CV stuff. I was leaking gear oil out of the passenger side diff, so I went in to replace the diff seal. I followed the advice of "chowcares" on YouTube in the...

Hello all, Recently bought a 2007 LC, attempting to get to a baseline maintenance wise with her. First thing on my checklist was the drivers wheel bearing, did lots of research and attempted several times without success as my bc axle will not come out far enough to even get the thinnest snap...

First post since getting a LC, go easy on me. I purchased a 2000 LC in August at 177k and am going through some baselining. So far I have gotten the TB/WP completed using an Aisin kit, lower ball joints, and inner and outer tie rods. Currently at 183k. This has all been a learning experience for...

Sorry if this has been covered elsewhere, I am quite a noob at searching on this site. I figured that there isn't (or hopefully there shouldn't be) a "guess, check, and revise," method for figuring out which snap ring fits on a CV Axle. The time has come to replace the CV Axle with a new OEM one...

I was working on installing new CVs and while installing the flange, it was not going on smoothly, so against my better judgement I decided to tap it on with a rubber mallet to get it to sink the rest of the way, it started to go then stopped part way and began pushing the CV out, I gripped the...

I recently took my LX in for a diagnostic. I got a good deal on it because of the high mileage, the previous owners took care of the engine and timing belt but everything else needs some love. Another positive is that there is zero rust underneath. -steering rack -outer tie rodx2 -upper ball...