All the roof rack options for Land Cruiser 100 series (1 Viewer)

[Luckymudder]

The end all be all post regarding roof rack options for the 100 series. I’ll start with this contribution:

LAND CRUISER 100 (1998-2006) Archives - Gobi Racks

www.gobiracks.com

 

[dogdaysindurham]

Roof Channel Rack ordering — Gamiviti

www.gamiviti.com

100 Series Roof Rack — Gamiviti

www.gamiviti.com

I believe there are 5 flavors of the Gamiviti rack plus a lot of other customization.

 

[dogdaysindurham]

Benc / Dissent Offroad has an aluminum rack.

Dissent Off-road. Quality Toyota Armor. Explore with Confidence.

Dissent specializes in manufacturing the highest quality off-road armor for Toyota 4runner, Tacoma, Land Cruiser, Lexus LX 470, LX 570 & GX 470. Aluminum & Steel Off-Road Bumpers. Explore with confidence when you equip your vehicle with Dissent Off-road. Tested off-road, Made in the USA.

dissentoffroad.com

More pictures here: Dissent offroad modular aluminum roof rack.

 

[dogdaysindurham]

Eezi Awning K9 Roof Rack

Toyota Land Cruiser 100 Series K9 Roof Rack Kit

Discover the ultimate in overlanding gear with the Toyota Land Cruiser 100 Series K9 Roof Rack Kit by Eezi-Awn. Engineered for rugged reliability, this roof rac

www.equipt1.com

Rhino Rack has a few different options

Fit My Car | Rhino-Rack

www.rhinorack.com

 

[dogdaysindurham]

Baja Rack is available from a bunch of distributors. A few that I had bookmarked. Will update if I get a chance with others.

Baja Rack 100 Series Land Cruiser Standard Basket Rack

Add cargo space to your vehicle so you can tackle big adventures with the Baja 100 Series Land Cruiser roof rack. This roof rack comes with mounting equipment.

www.metaltech4x4.com

BajaRack

ok4wd.com

ARB offers 2 versions mesh and cage I believe

ROOF RACKS & ACCESSORIES

arbusa.com

Ironman 4x4 has a hybrid mesh rack:

Roof Racks

Upgrade your off-road vehicle with Ironman 4x4 roof rack systems. Our cargo carriers, truck racks, and cross bars offer durable storage solutions.

ironman4x4america.com

 

[dogdaysindurham]

Frontrunner is also available from a bunch of different folks.

Toyota Land Cruiser 100/Lexus LX470 Slimline II Roof Rack Kit - by Front Runner

This 1964mm/77.3

www.frontrunneroutfitters.com

Connection Problem

Slee - Front Runner Roof Racks

Specialist in Toyota 80 Series Land Cruisers. Hard to find parts, off-road accessories and custom fabrication

sleeoffroad.com

Prinsu Design's

Toyota Land Ccruiser 100 Series Prinsu Roof Rack | 1997-2006 - Prinsu Design Studio

What do you need to take on your next adventure? A pair of mountain bikes, a rooftop tent for camping, or just some extra fuel to help you get deep into the wilderness? Whatever it is the Prinsu Design roof rack will take care of all of your extra cargo and adventure gear needs! Product …

prinsudesignstudio.com

Bowfin

100 Series Roof Rack

The roof rack for the 100 Series is ready! Constructed of the same laser cut 1/4" thick aluminum as the popular 80 series rack, the 100 series rack also uses 51" long 10 series T-slotted cross bars. There are 8 cross bars for loading items on and 1 more to hold the wind deflector. The rack is...

www.bowfincruisers.com

Bumpitoffroad offers a custom racks

Custom Roof Rack For 100 Series Toyota Land Cruiser

Custom Roof Rack For 100 Series Toyota Land Cruiser

www.bumpitoffroad.com

 

[Trunk Monkey]

Thread already exists . . .

Let’s see those aftermarket Roof Racks

forum.ih8mud.com

 

[ERMB]

DIY custom using unistrut and linear aluminum sheet. Still have to make the fairing...

 

[JunkCrzr89]

DIY custom using unistrut and linear aluminum sheet. Still have to make the fairing...

View attachment 2138865

Care to share the info and specs? I had planned to also DIY one, but out of 80/20. This looks much cleaner.

 

[planomateo]

Thread already exists . . .

Let’s see those aftermarket Roof Racks

forum.ih8mud.com

Merge these?

 

[ERMB]

Care to share the info and specs? I had planned to also DIY one, but out of 80/20. This looks much cleaner.

I ended up using Trail Taylor low-pro rail mounts. I attached my major cross members to the mounts themselves and used aluminum angle bar to support some secondary cross members made from the uni-strut. The shaped front and back are cut pieces of aluminum attached to the front and rear of the angle bar for aesthetics as well a mounting point for my soon to come fairing which is also made from aluminum sheet. I made a similar rack for my Tacoma, both of which are more than capable. I've hauled a few hundred pounds worth of lumber up top a few times on both vehicles.

 

[MongooseGA]

@ERMB That looks very nice. I imagine with the fairing installed, it'll be as much a looker as one of Dissent's racks. Love the low profile. Have you had any flexing of the cross bars and contact with the roof?

 

[terrapin]

Let’s see those aftermarket Roof Racks

forum.ih8mud.com

Any photos or info on shorter (1/2 or 3/4) racks for the 100? I'd prefer to have one that doesn't cover the sunroof. I know that many racks have cutouts or sliding crossbars for the sunroof, but I don't really need a full sized rack. These shorter racks seem to be more common on 4Runners.

 

[ERMB]

@ERMB That looks very nice. I imagine with the fairing installed, it'll be as much a looker as one of Dissent's racks. Love the low profile. Have you had any flexing of the cross bars and contact with the roof?

There is a some slight flexing, but I haven't had any issues with contact with the roof. The fairing design is modeled more after the prinsu due to the contour of the roof and the shape of my side panels. Can't wait to get it done!!

 

[nakman]

Let’s see those aftermarket Roof Racks

forum.ih8mud.com

Any photos or info on shorter (1/2 or 3/4) racks for the 100? I'd prefer to have one that doesn't cover the sunroof. I know that many racks have cutouts or sliding crossbars for the sunroof, but I don't really need a full sized rack. These shorter racks seem to be more common on 4Runners.

@terrapin Man, all you gotta do is ask!

Half rack...

3/4 rack...

All still available by request, though the reality is once you add it all up the total cost winds up not too much less than a full length flat rack... which has a lot more uses. But we do make these from time to time.

Also, they're more common on 4Runners because 4Runners don't have front towers! 3rd and 5th gen, at least... 4th gens didn't get middle towers. So for folks who don't like to drill, or don't want to cantilever out a roof rack, their only option is a shorter rack.

 

[Nightbrew]

Question for anyone running the prinsu, prospeed, bowfin, victory 4x4 etc style racks. Can you mount a cargo carrier with wrap around clamp style mounting system. It looks like most of the new cargo carriers come with these clamp style mounts that wrap around the cross bars. Alot of these racks look too close to the roof for the clamps to work as intended. Maybe the method is to remove 2 cross bars, mount cargo carrier to the removed cross bars, and then reinstall them into the rack? Not sure, just wanted to see what people are doing. Thanks

 

[boma23]

So all I'm trying to find right now is the equivalent thread for rear bumpers.... it's not coming up easily on search!
Seen the body armour general thread, but no real full list of rear bumpers.

 

[Nightbrew]

Another question for the group. Is anyone running extended cross bars on the prinsu, prospeed, victory racks? The crossbars look like they sit a little below the side rails, and I’m curious if there would be a simple way to occasionally put a couple of extended bars across the top.

 

[nakman]

Another question for the group. Is anyone running extended cross bars on the prinsu, prospeed, victory racks? The crossbars look like they sit a little below the side rails, and I’m curious if there would be a simple way to occasionally put a couple of extended bars across the top.

I don't normally jump into these but hey we could actually help with that, have 2 bolt-on solutions actually that might work for you.

First would be to add our multi brackets & tube clamps, 4 of each, then repurpose some extended length Yakima bars you may already own, or could source locally The multi brackets have slots on the bottom that bolt up to your extrusions, and the curves on the top of them and tube clamps are sized for Yakima bars. They were made for this application. Multi Brackets — Gamiviti - http://www.gamiviti.com/multi-brackets

Second would be we could weld you a pair of cross bars at any length you desire- would be round steel, and they land on a base plate with a 3" hole pattern. You could then add our extrusion adapter plates to get those to mount to your extrusions. Cross Bars — Gamiviti - http://www.gamiviti.com/cross-bars and Adapter plates — Gamiviti - http://www.gamiviti.com/adapter-plates.

Actually a third option would be to just purchase some longer extrusions from 80/20, then figure out a way to bolt them to your current extrusions. You could get those joiner plates they sell and run them vertically to tie them together. hope that helps!

 

[Mike NXP]

Question for anyone running the prinsu, prospeed, bowfin, victory 4x4 etc style racks. Can you mount a cargo carrier with wrap around clamp style mounting system. It looks like most of the new cargo carriers come with these clamp style mounts that wrap around the cross bars. Alot of these racks look too close to the roof for the clamps to work as intended. Maybe the method is to remove 2 cross bars, mount cargo carrier to the removed cross bars, and then reinstall them into the rack? Not sure, just wanted to see what people are doing. Thanks

If you just want to mount a cargo carrier why not just use your stock cross bars...unless you have other uses in mind.