Builds Airbagged 80 series on 42 inches. Low cost Russian build thread (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Hi, thanks for sharing this build its awesome!Newbie here on air bags...What controls the rebound on your suspension?
 
Hi, thanks for sharing this build its awesome!Newbie here on air bags...What controls the rebound on your suspension?

Thanks
Now only 4 rocker switches and air gauges. Later I have to buy accuair elevel or same height controller

8C64B19D-E56A-4A42-8F29-A664DCDD996D.jpeg
 
Those tires are sick, it looks like the wheels you have for the goodyears are beadlocks? they have an inner piece of pipe (PVC) between them that keep the tires to the wheels?

Great pics BTW
It’s JDM Lodio Drive rims. One rim complete from two inners and center.
 
I love how out of the box this build is. Thanks for the write up, always been curious when in the past you have posted little tid bits and pics.
Thanks
 
Transmission oil cooler. Chinese “Euro” type 30 row oil cooler, 9 inch fan, custom made radiator shroud 0.8mm thickness.
84F9A9A8-C2A9-4183-B94F-0A7509CE6974.jpeg
E19866D9-8211-4399-95F4-8CEC2845C0F5.jpeg
6C0FC652-7678-45F1-AE69-08421E3C8001.jpeg
CB4B153B-043B-45F3-82E2-67A4010DA67C.jpeg
A5D5C89E-6847-426A-A673-4C2F8E2AF051.jpeg
 
I replace the alternator. Stock 80A, new 130A. Alternator from jdm toyota mark-2 jzx110 1jz-fse engine. P/n 27060-46320. Fits without any mods except pulley change from stock. 3Pin plug same as on stock.

Left 130A
E5FBB8B3-6869-48FA-99F8-5A244B934075.jpeg

8F9F9BEF-13D8-40ED-95EE-FB1706B43D14.jpeg
F00F0BD2-94D7-4219-843B-C047E18B4C72.jpeg


Power cable changed to 25mm2, it’s about 3ga
F13818D5-9BA1-4D9C-9EBC-86E5356F6D4B.jpeg
 
Last edited:
Let’s continue

York 210 compressor OBA.
Compressor mount made from 5mm thickness metal plate. I haven’t 3/8 bolts and recut all threads to m10*1,5
31654ED3-4C37-48E4-B429-1BF73A3E3CBC.jpeg
8EB6FD1B-5F53-44EE-8422-1FEF0104F7D1.jpeg
B3F4BF81-1C0A-4D80-8D10-210B27EB3473.jpeg
0FE753B8-B45A-42A3-A5B4-472FF1222DC5.jpeg
C3B7D2AD-B539-4943-A36C-AA4AE5B8CBF4.jpeg
 
Sleeping platform. It’s easy to build and comfortable platform.
Made from square tube 20*20*2mm and 25*25*2mm. 10mm plywood, 10mm foam rubber and leather substitute. Back panel lift up, gas lift holds in up. Size is 1,35*2.0 meters

5A174618-28E6-4612-876A-7884B1A964C2.jpeg


EE28C6A9-A0C2-47CC-9C1F-99834968CA74.jpeg

BDDA0921-492F-4B26-8870-C1E76F34BD38.jpeg
6E7F648F-AC51-46A2-A19D-C6EA73B742F7.jpeg
C0D70F54-C8DD-4812-9970-01D346A08D13.jpeg
 
“Marine” battery kill switch. Mount on a battery tray. It used on a long parking for a battery saving
4D4D3554-9E84-4662-9270-6556E445F9C9.jpeg
333609F6-E428-4B1D-8C82-F2787215FC46.jpeg
F34ABF5F-4CA1-4BF9-B218-2CF80AE2688A.jpeg
C07FFC14-165A-441D-BA6B-0ACDCC2731AB.jpeg
 
Auxiliary relay and fuse box. Connected to a kill switch, MTA 150A fuse in holder. Five different MTA modules in one box.
6DE6CB30-6AEB-40B7-AEB4-5FAA607083C5.jpeg

From left. 2 holders for 4 mini fuses and 2 big 40A relays. 2 holders for 6 mini 30A relays, holder for 20 mini fuses.
907BC60C-B542-4F3F-B1C3-74814A122B8E.jpeg



Mount in engine bay near stock fuse box. All electric in one place.
562C38A1-F05F-4E87-8B6C-A5888C893117.jpeg
Everything compare in one nice box
4FAAF584-320F-42B0-9555-BCE814AD1493.jpeg
E5DF4E5B-AD97-45CE-A27D-82EB6372147F.jpeg
 
Last edited:
This is becoming one of my top favorite builds...
 
Gauges.
On my car installed Chinese replica DEFI advance ZD. Good stuff. 2 pressure sensors, 2 temp sensors, egt and boost.



6AD9BCBF-E07E-44B7-96F8-9DC5186725F0.jpeg


Stock Trans temp sensor replaced to Defi sensor. I use M16*1,5 to 1/8npt adaptor.
3ADF81FF-5B4C-4888-8166-98C4CB3D0EE7.jpeg


Water temp sensor plug in upper radiator pipe.
5E32EEDE-5B12-4687-8B8B-BFF881A2ECCB.jpeg


Pre turbo EGT sensor
EA63E03A-8EC1-4668-A9C3-4BD72E0183F3.jpeg


Oil pressure sensor.
0788588C-3FB6-4A77-BEEC-4B85E255BDC8.jpeg
 
Last edited:
Next step is music. I like quality sound. I like quality and loud music.
First is a 3-way front.
I Buy 8” mid bass, 3,5” mid range and 2” tweeter

16C3B95E-30A4-4957-B591-2DC0661EAED0.jpeg


007BB14B-36CE-4EC7-99D5-F870449F96E7.jpeg


Cut some rings for podiums
D0F7B05E-5F77-4EA0-9745-81588995F23C.jpeg

8371A4F3-2EAA-402E-A211-631A201AEEAF.jpeg
 

Users who are viewing this thread

Back
Top Bottom