70 Series Rear cargo panels (1 Viewer)

[Postoy]

I am wanting to replace my rear cargo panels with 3/8" Baltic Birch plywood. Thought I would see if anyone has taken the time to draw these before I go and do it.

I've already drawn the larger rear door, Planning a fold down table for that section. I have the .DXF if anyone is interested.

And here is how it looks installed. I plan to stain the wood grey to match the grey in the interior.

 

[roscoFJ73]

Are they held in with screws? Those awful plastic plug clips are rubbish

 

[Postoy]

Are they held in with screws? Those awful plastic plug clips are rubbish

I replaced the clips with M6 rivnuts and used stainless tapered bolts.

 

[FJ73Texas]

Looks really good. Getting the holes to line up is harder than it looks but then I am not an auto cad expert.

 

[jblueridge]

Where did you find tapered bolts?

 

[Postoy]

Where did you find tapered bolts?

I found them at a local hardware shop in my town. They are m6 x 30

And there is the rivnuts

 

[divemedic]

I’m doing similar for the sides. Planning on burning mine.

 

[fireball]

I made the four rear panels using king starboard. The right side has a Baltic birch drop down table.

 

[Lenny33]

This might make my list of wants...
Well done- looking forward to seeing the end product.

 

[Postoy]

Here is my parts after finishing them. I plan to install later tonight.

 

[Postoy]

 

[Postoy]

Rear fold down is done. I think I’m going to add a second support on the right side.

 

[Honger]

The Troopcarriers of Australia Facebook group has a dxf file for all the interior panels for Troopies (75/79 series). That includes the back doors. I've got a copy of that...

Ho can we get a copy of your dxf @Postoy?

 

[Honger]

Here is my parts after finishing them. I plan to install later tonight.

View attachment 2087602View attachment 2087603

This gray stain came out amazingly well. Very sharp looking.

 

[Postoy]

The Troopcarriers of Australia Facebook group has a dxf file for all the interior panels for Troopies (75/79 series). That includes the back doors. I've got a copy of that...

Ho can we get a copy of your dxf @Postoy?

DM me your email and I can send you the file.
I tried to attach it on here but I can’t seem to make it work.