The front cup holders I received for my 60 don’t fit. Are there different sizes of 60 consoles? So sad...
62 cup holders on 60 console
- Thread starter fj40z
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
It’s not clear that it doesn’t fit in the picture, it’s sitting on top of the console. Here’s another view...
You have the late model 60 or 62 model console. You received the early 60 console cup holder. PM me your name and date of purchase so I can figure out what went wrong. I will make sure you get what you want. The early 60 console has a large rectangular hole that will accept that cup holder you receieved perfectly. You need the 62 Double Cup Holder. It also looks like your trying to install it in the square hole. That means you probably want the "62 Series Single Cup Holder Square insert" Take a look at the three product links below. They are the cup holders that fit your console:
62 Series Double Cup Holder - BH3D Printing
62 Series Single Cup Holder Square Insert - BH3D Printing
60/62 Series Rear Double Cup Holder - BH3D Printing
Last edited:
Looks like things have slowed down for the rear double cup holder for the 60/62 series. Just wanted to thank all the guys who bought one from the initial batch and supporting my little business. I made another medium sized batch that should now last a while since the initial wave has come and gone.
Been a while since I have posted on here. Being Black Friday I'm getting flooded with emails asking if we are running "Black Friday Specials". Unfortunately we are not running a black Friday specific promo BUT the mud discount of 15% is still in effect until the 1st of January. Coupon code "TEQ15". Right now the promo only works on our own website www.bh3dprinting.com We had to cancel it on Etsy and Ebay. We have done everything in our power to fight inflation within our business and get as creative as possible to not have to increase prices and so far we have not done that. The good news is that we have not increased our pricing this year. The bad news is this inflation is a loosing battle on our end. We will be forced to increase prices around 10-15% as of January 1st 2022. Here is the link to our site, etsy page, and ebay product page.
www.bh3dprinting.com
www.etsy.com/shop/bh3dprinting
www.bh3dprinting.com
www.etsy.com/shop/bh3dprinting
red66toy
Supporting Vendor
Love the cup holders in my FJ62!! Such a great product. 
It's been a while since I posted in this thread. The emails are starting to roll in again asking about making cup holders for the 60/62 series. Seems like there is a new wave of 60/62 enthusiasts coming in that don't know we already make cup holders for them. It's probably my fault for not advertising more and being on this forum more regularly. Figured no need to start a new thread since the product pics are just a few posts back. I guess this would be a "bump" for the new guys. Hopefully this will get the word out to them and the emails will stop. We sell them on our website, etsy, and ebay.
www.bh3dprinting.com
www.etsy.com/shop/bh3dprinting
www.bh3dprinting.com
www.etsy.com/shop/bh3dprinting
Cripes this almost makes me want to go back to an OEM console in my 62!Been a while since I have posted on here. Being Black Friday I'm getting flooded with emails asking if we are running "Black Friday Specials". Unfortunately we are not running a black Friday specific promo BUT the mud discount of 15% is still in effect until the 1st of January. Coupon code "TEQ15". Right now the promo only works on our own website www.bh3dprinting.com We had to cancel it on Etsy and Ebay. We have done everything in our power to fight inflation within our business and get as creative as possible to not have to increase prices and so far we have not done that. The good news is that we have not increased our pricing this year. The bad news is this inflation is a loosing battle on our end. We will be forced to increase prices around 10-15% as of January 1st 2022. Here is the link to our site, etsy page, and ebay product page.
www.bh3dprinting.com
www.etsy.com/shop/bh3dprinting
View attachment 2848534View attachment 2848535View attachment 2848536View attachment 2848537View attachment 2848538View attachment 2848539View attachment 2848540
I guess it's time to post a response here. I'm getting very consistent daily requests to make our cup holders in the factory colors. We offer that in some vehicles but not all. The 80 series only had 3 colors. The 3rd Gen 4Runner had 3 colors for the consoles. The 60/62 series is an entirely different beast. For some reason the international markets used a wide variety of interior colors that in many cases are different than the US colors. They are all similar but not the same. Just in brown alone I have come across 7 different shades across all global markets. It's just WAY too difficult to try and match all of those colors and have all of those options on our different vendor sites. Unfortunately we have to stick with a textured flat black finish to keep it sane for us and be a viable product line. My painter would hate me if I asked him to color match all of the 60/62 series colors and have ALL of those options ready to ship at all times. It's way beyond anything cost effective to attempt that.
I forgot one thing. A common question I get with the 60/62, 80, and 3rd Gen 4Runner crowd is this; Do the rear seats still fold down with the back seat cup holder installed? The answer to all 3 product lines is YES. Here's a pic of the 60/62 rear cup holder with the seat folded up. It makes contact right as it is a full rotation forward but no harm to anything.
The holiday season is right around the corner and once again I'm starting to get a constant flow of folks asking about holiday sales or Black Friday promos. We are not doing anything specific BUT our mud discount is still available on our website. www.bh3dprinting.com
Use code "TEQ15" at checkout. That will give you 15% off the entire order and still allow for free shipping. Here are some of the 60 series products.
Use code "TEQ15" at checkout. That will give you 15% off the entire order and still allow for free shipping. Here are some of the 60 series products.
Just bumping this tonight so I don't get flooded with emails in the morning with questions about Black Friday promos. We are running the same promo as last year at 15% off the entire order plus free shipping. Use coupon code "TEQ15" on our website www.bh3dprinting.com. The only change this year is that we are also running the promo over on Etsy so our international buyers can also jump in on the discount. On Etsy use coupon code "SAVE15" at our etsy shop www.etsy.com/shop/bh3dprinting
No discounts on ebay or amazon right now. There fees are just brutal these days.
No discounts on ebay or amazon right now. There fees are just brutal these days.
I forgot to do the annual bump the night before Black Friday. Got slammed with emails/messages today about doing any Black Friday promos.
We don't typically do anything special during holidays. Our profit margins are super tight so we don't have the wiggle room for any huge sales BUT we still offer the mud discount to folks. If you use coupon code "TEQ15" at checkout on our website or Etsy page you will get 15% off the entire order plus it will still allow for free shipping. Sorry for the late notice. Been swamped trying to keep up with orders.
www.bh3dprinting.com
www.etsy.com/shop/bh3dprinting
We don't typically do anything special during holidays. Our profit margins are super tight so we don't have the wiggle room for any huge sales BUT we still offer the mud discount to folks. If you use coupon code "TEQ15" at checkout on our website or Etsy page you will get 15% off the entire order plus it will still allow for free shipping. Sorry for the late notice. Been swamped trying to keep up with orders.
www.bh3dprinting.com
www.etsy.com/shop/bh3dprinting
I thought that would be plenty but 2 more should do it.
how many kids do you have?!!! that looks like my wife’s sienna!!
I get reduced to using one when "She" gets inhow many kids do you have?!!! that looks like my wife’s sienna!!
.
