- Thread starter
- #21
Anyone know the quality of this bumper? 40+ winch bumper for the 60.
4+PLUS 60 SERIES DELUXE WINCH BUMPER
4+PLUS 60 SERIES DELUXE WINCH BUMPER
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yes it is nice to have a V-8. YOu can see my long thread about the engine swap. Only recently have I gotten it running right. (PCM ISSUES). There are some minor changes from this pic but here is generally what the engine layout looks like. It has pretty good power...I just got fed up with the I-6. By the way it was not $$cheap, even though a buddy and I did all the work, except for the PCM programming. I still need to get the A/C working and do some fine tuning on the wiring and some little things here and there.
Anyone know the quality of this bumper? 40+ winch bumper for the 60.
4+PLUS 60 SERIES DELUXE WINCH BUMPER
I MAY BE VERY, VERY BIASED BUT I LIKE THE QUALITY.
Mail me direct, I'll see if we can work out a better situation... cost wise
4plusproducts@gmail.com
thanks , dave
yuppers, the 10 is on the list for that bumper, The M8000 mounts both ways, feet forward or feet down. The 10 is a great choice...that and a snatchblock would yank you up the side of a building.
I think ARB is a little light for a 10,000 with a snatch block, unless you pull straight on. A customer had me build a new front 60 after he bent his ARB with a 12,000 ( same bumper ) while pulling upward out of a ditch. It bent back about 10 degrees.
It's floating around town on the front of a ford pickup now. Some broke redneck bought it for $50 and modified it to fit a Ranger ( the small Ranger ). It looks pretty silly. It sticks way out in front and each side