40 series general tech and classifieds (2 Viewers)

[ntsaint]

Take the drum off and shoot a pic?

Soon as I can get out there for more than 5 mins will do that. Maybe tomorrow night. Thx Bossman.

 

[MScruiser]

I'm looking for a set of 4 steelies compatable with disk brakes. Condition does not matter too much, as long as they are true.

 

[wct49]

I'm looking for a set of 4 steelies compatable with disk brakes. Condition does not matter too much, as long as they are true.

as a person in the business, I can attest to how bad a false wheel is....

 

[Bodean]

as a person in the business, I can attest to how bad a false wheel is....

Most of them are Liars!

 

[wngrog]

2F is headed to 49 Cruisers for inspection for meat neck

 

[Nottajeep]

Nice! giddy up
I need some 2F luck

 

[ntsaint]

So I think maybe there's a problem here...

Pulled driveshaft and opened drum and the xfer case is draining out of it?!?

Is that just the seal between the two? That's a new seal...

PS I hate this damn thing tonight...

 

[ntsaint]

How hard is it to pull xfer case? Think I need to do that and just take it to Rob for r&r.

 

[wngrog]

Naw man, that seal is a bitch. Happens all the time. There is a method. My brain is gone or I would tell you. Very common.

 

[MScruiser]

So I think maybe there's a problem here...

Pulled driveshaft and opened drum and the xfer case is draining out of it?!?

Is that just the seal between the two? That's a new seal...

PS I hate this damn thing tonight...

View attachment 1256420

Damn, just look at that pretty frame. Drool.

 

[Bossman]

T-case isn't hard to pull if you really need to. Most of the bolts are accessible from outside but 2 (I think) have to be removed inside the long cover plate. Then you need to make a sort of puller to separate it. I think I can find the one I made years ago if you decide to pull it. I would sure try another seal first though.

 

[MEMCruiser]

I miss looking at my 40. Thats all I really miss.

 

[Bomar]

crazy smoking deal for seat belts.... New Seat Belts

Military Humvee Seat Belt Kit, 4 piece - 622852, Field Gear at Sportsman's Guide

$26 for a new seat 3 point

 

[MScruiser]

Can anyone tell me what gauge sheet metal is on a 1978's dash? 18ga?

 

[wngrog]

I'm sure Braswell is too hard headed for this but once Rob determined the guts of this beast is good he should just let Rob do the swap.

 

[Nottajeep]

Make the FJ40 Great Again
#MFJ40GA

 

[wngrog]

Someone that works at the Chick
Fil A on Poplar by The Belmont

Fine

Rocking 33s 1.5" shackles. Stock springs.

Steelies and caps. Uncut fenders.

Yes yes yes

 

[MScruiser]

That's the same color and mods that mine will have when its done.

@wngrog , that's for the heads up about the powdercoater you suggested a few weeks ago; I talked to him today. Sounds like he's gonna be a good fit.

 

[77TLCFJ40]

Please help me keep a lookout for a Detroit locker for my rear axle. Thanks

 

[Bodean]

Almost done!