4 - Lo issues (9 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 1, 2025
Threads
1
Messages
1
Location
cairns
Recently purchased a 2008 200 Sahara. Drives mint and tows great. however I’ve not been able to put in 4 - Lo. Following lights come on dash- vsc- engine- ! - and the 4 - Lo flashes constant. Left me stranded as I it wouldn’t go back in to 4 hi. It’s in the workshop atm getting new actuator but that hasn’t fixed the problem. What a bummer.
IMG_3934.webp
IMG_3933.webp
 
The symptoms (not being able to get into 4lo) could be a lot of things unrelated to the drive train. Evap codes are a typical thing that causes this and all you need to do is clear the codes with an OBD2 reader. The first step is scanning for codes.
 
There is more in this thread than just actuator info.

 
Diesel or petrol?

That could really change the facts on emissions as a cause. Yes very different evap strategies, but a lot more complexity in the diesel exhaust system.

Either way please post the details and results. Anything helps the knowledge base here, even if most of us are in the states with the 3UR gasoline engine.
 

Users who are viewing this thread

Back
Top Bottom