Just scooped up GHOSTS freshly degreased and media blasted to a delicate precision 3FE sheet metal valve cover
It was repainted over the factory let’s cll
It light PEWTER to a much darker version .
And F,g yes , grommets on , breather hose in place and I can then assume still
Bolted to the engine too …
Well my now in-depth
% TOYOTA OEM japan spec parts de-smog is winding toward t here finish line
I have also started to bulk order the known and confirmed oem
Toyota parts for the soon to be new Bench-Mark 3FE de-smog kit complete with basic mini meme FSM style step by steps instructions included …
I will say that a lot of in between has gone on too
Like installing my updated 90A external snow version Genuine Japan spec 3F carb alternator and the single
Groove OEM pully too ..
I replaced the A/C tensioner and Rebuilt the P/S idler
The later 3FEz have that black big beer can size roller too
That has been sourced and will be available too
The NLA twin heater pipes that “ were “ NLA / DISC . Are well ….
No longer that status I can say factually and have been test fit and are a flawless wonder to see in place ….
I chose this 2 part finishing kit to get the cover back to stock best I can …
I have a super killer kool BLING SUPRISE too that all who like it can do / Install on there 3FE
Lasty ,
Fir the last say 4ish years I have been working the key board and phone to bring the upper t-stat housing to the table …
Back from the dead !!!
Well that is still a work in progress
But I have truly nailed the next best thing
And it’s a BLING
and a solid thing too
More on that later …
Here is the cover naked ..
It was repainted over the factory let’s cll
It light PEWTER to a much darker version .
And F,g yes , grommets on , breather hose in place and I can then assume still
Bolted to the engine too …
Well my now in-depth

I have also started to bulk order the known and confirmed oem
Toyota parts for the soon to be new Bench-Mark 3FE de-smog kit complete with basic mini meme FSM style step by steps instructions included …
I will say that a lot of in between has gone on too
Like installing my updated 90A external snow version Genuine Japan spec 3F carb alternator and the single
Groove OEM pully too ..
I replaced the A/C tensioner and Rebuilt the P/S idler
The later 3FEz have that black big beer can size roller too
That has been sourced and will be available too
The NLA twin heater pipes that “ were “ NLA / DISC . Are well ….
No longer that status I can say factually and have been test fit and are a flawless wonder to see in place ….
I chose this 2 part finishing kit to get the cover back to stock best I can …
I have a super killer kool BLING SUPRISE too that all who like it can do / Install on there 3FE
Lasty ,
Fir the last say 4ish years I have been working the key board and phone to bring the upper t-stat housing to the table …
Back from the dead !!!
Well that is still a work in progress
But I have truly nailed the next best thing
And it’s a BLING

More on that later …
Here is the cover naked ..
Last edited: