2" bolt in receiver for 4 pintle holes?

[Pskhaat]

Said receiver for just bike rack. I can't find a receiver that matches the specific 4 bolt pattern. (No problem finding my pintle hook).

Anyone have a reference?

 

[WarDamnEagle]

There are quite a few out there. First google hit: Receiver Trailer Tow Hitch Toyota Land Cruiser FJ40 hard top powder coated FJ80 – JT Outfitters - https://www.jtoutfitters.com/product/receiver-trailer-tow-hitch-toyota-land-cruiser-fj40-hard-top-powder-coated-fj80/

Edit: Here's another: https://www.coolcruisers.com/hirefj.html

 

[Pskhaat]

There are quite a few out there. First google hit: Receiver Trailer Tow Hitch Toyota Land Cruiser FJ40 hard top powder coated FJ80 – JT Outfitters - https://www.jtoutfitters.com/product/receiver-trailer-tow-hitch-toyota-land-cruiser-fj40-hard-top-powder-coated-fj80/

Edit: Here's another: https://www.coolcruisers.com/hirefj.html

You are right. And there is one criteria I completely forgot to mention. Looking for something that does NOT hang down. Critical I know, something alike:

 

[WarDamnEagle]

This one has the correct hole spacing (I think). From the description: Hole spacing (center to center): 1.75 in. vertical x 3.38 in. horizontal

1-Position 20,000 lbs. Pintle Hook Mount for 2 in. Hitch Receivers

 

[Devils Paw 80]

I got this one for that purpose to use with my new to me LX 450. Bolt holes line up perfectly with the stock cross member holes. Hmm. Guess it's out of stock now. A lot cheaper than a receiver hitch plus way easier install. Amazon product ASIN B00UUGOYAQ

 

[Pskhaat]

I got this one for that purpose to use with my new to me LX 450. Bolt holes line up perfectly with the stock cross member holes. Hmm. Guess it's out of stock now. A lot cheaper than a receiver hitch plus way easier install. Amazon product ASIN B00UUGOYAQ
View attachment 2738686

Got this and about to try it.

 

[GTV]

@Pskhaat did you ever find a solution? I'm looking for the exact same thing but I'm having a really hard time finding something that comes straight out and has the correct bolt pattern.

 

[Pskhaat]

@Pskhaat did you ever find a solution? I'm looking for the exact same thing but I'm having a really hard time finding something that comes straight out and has the correct bolt pattern.

I did get and use this. https://a.co/d/f38m1NS

It is fine. The holes oddle are off by just a mm or so but has worked with no drama.

 

[GTV]

I did get and use this. https://a.co/d/f38m1NS

It is fine. The holes oddle are off by just a mm or so but has worked with no drama.

Dang. I was hoping you found something without a drop and that didn't look like it was made out of an old bed frame.
It's looking like I'll have to make my own...

 

[Pskhaat]

Dang. I was hoping you found something without a drop and that didn't look like it was made out of an old bed frame.
It's looking like I'll have to make my own...

To be clear. There is no drop. Straight out.

 

[GTV]

To be clear. There is no drop. Straight out.

In any case I was just steered towards this one. Exactly what I’m after.
Amazon product ASIN B0B9746WYT

 

[Pskhaat]

In any case I was just steered towards this one. Exactly what I’m after.
Amazon product ASIN B0B9746WYT

Please update woth how that works, I recall one of them I tried the hold pattern didn't work.

 

[GTV]

Receiver arrived. Bolt pattern is correct.

At first glance it looks like a really nice cast unit, closer examination shows the casting is not of the highest quality. Not sure I trust it entirely. That’s ok though, I’m going to use it as a test piece to build one that will put my bike rack precisely where I want it to be. I like the simplicity of this and the weight savings over the weight distribution hitch is enormous.

 

[06reg4x4]

Receiver arrived. Bolt pattern is correct.
View attachment 3372851
At first glance it looks like a really nice cast unit, closer examination shows the casting is not of the highest quality. Not sure I trust it entirely. That’s ok though, I’m going to use it as a test piece to build one that will put my bike rack precisely where I want it to be. I like the simplicity of this and the weight savings over the weight distribution hitch is enormous.

How far out does that stick out?

 

[GTV]

How far out does that stick out?

I’m not near my LC right now but I’d guess 4-5” beyond the bumper cover. I built a new one that is much more compact.

 

[Devils Paw 80]

How far out does that stick out?

Enough that you need to remember it's there at all times when at the back. Banging shin into mine once hopefully did the trick.

 

[06reg4x4]

I’m not near my LC right now but I’d guess 4-5” beyond the bumper cover. I built a new one that is much more compact.

View attachment 3493615

That’s what I’m looking for. Just a short one.