- Thread starter
- #61
I just do this recently
1KD project 'no turning back' (2 Viewers)
- Thread starter Tsvigo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Thanks! I was wondering if they were AN fittings, makes total sense why I couldn’t seem to find metric inverted flare fittings like that.
- Thread starter
- #63
Cheers mate glad that I can help
- Thread starter
- #64
update
i did a 1330km distance, fuel consumption is at 750km/80 liter, 35" tire R/17 wheels. tune is finalised with the best performance that it can provide.
i'm currently waiting for smaller size injectors. currently i'm running +30%.
i also think that i will build another 1kd that will produce 300-400hp again.
yes "again"...........
i did a 1330km distance, fuel consumption is at 750km/80 liter, 35" tire R/17 wheels. tune is finalised with the best performance that it can provide.
i'm currently waiting for smaller size injectors. currently i'm running +30%.
i also think that i will build another 1kd that will produce 300-400hp again.
yes "again"...........
- Thread starter
- #65
A broken CT16V has been repaired. But then I got a Garrett replacement. It is covered because this one actually have a custom impeller. Sorry boys, something still need to be secret.
- Thread starter
- #66
Latest update clutch slipping after 4500km drive.
I’m using a npc 1008 clutch. 4th and 5th gear slips. Now the 3rd gear is slipping. New clutch is on order. I will show what the clutch selection next.
I’m using a npc 1008 clutch. 4th and 5th gear slips. Now the 3rd gear is slipping. New clutch is on order. I will show what the clutch selection next.
- Thread starter
- #67
I’m having clutch slip on 5th gear, then 4th and 3rd. Due to that i choose uniclutch. Blue which is 800ft-lbs torque. Pedal feeling is lighter than standard clutch. Very forgiving on traffic jam situations. It is very grip totally. Alittle bit of noise when engaging the clutch due to it is a twin plate. But it is a lot quiet compared to regular twin clutch, well….. back in my petrol engine days.
I installed one of those behind my 12HT
- Thread starter
- #69
It is almost 1 year since I start my engine swap till now. It is expected that the 1KD very efficient. Depending on what u are doing with it.
Results
200WHP (obd2 flash tuned)
+10% euro 3 injectors
35x11.5xR17 tire size .
Consuming 80 liter diesel = 800km distance highway use. +/- 30km difference street and highway drives.
I would want to push higher 250whp power. But I went through 4 times of blowing up my manual transmission already.
Results
200WHP (obd2 flash tuned)
+10% euro 3 injectors
35x11.5xR17 tire size .
Consuming 80 liter diesel = 800km distance highway use. +/- 30km difference street and highway drives.
I would want to push higher 250whp power. But I went through 4 times of blowing up my manual transmission already.
- Thread starter
- #70
My first gearbox rebuild , this was late July. Then 2nd was early august . 3rd was late November 4th, mid December before Christmas 2024.
It’s just Toyota transmission doing its things…
It’s just Toyota transmission doing its things…
- Thread starter
- #71
All photo time line goes in order, I will be driving as is for now with my 200whp tune. Meanwhile I’m looking for transmission solution. Or I will keep it as 200whp, anything more than 200 will break the gear box.
You went through four rebuilds on the transmission?! Time to beef up your transmission case. I thought the transmission was strong enough to handle this power, but I guess not.
- Thread starter
- #73
If you don’t do things that is crazy like what I’m doing , it will hold. It’s just a 151f doing its things when seeing a 250whp . They never like it. H55f is abit higher h152f is abit higher than the 55f. I broke many transmission in the past. With different combination of engine.
GTSSportCoupe
2LTE abuser
Please upload some videos of this thing once you have it going again! Must be a beast! Would love to see it zero to highway speed.
Sorry to hear about the transmission woes. Hope the rebuild goes okay.
Sorry to hear about the transmission woes. Hope the rebuild goes okay.
- Thread starter
- #75
It is easy to rebuild if there’s parts. I’m going to bc by end of the month. I don’t have extra hands for camera.
Last edited:
- Thread starter
- #77
Was thinking auto 8speed .
- Thread starter
- #78
Broken ring gear and another 3rd gear. I’m coming with a better solution soon. If that goes well I will push my engine to 300whp. And that’s my goal.
GTSSportCoupe
2LTE abuser
Would love to see videos of this thing running and driving before you wreck it again...haha. Seriously; very cool truck, please share more pictures of it driving.
