1FZ-FE scaled injector setup (13 Viewers)

[DominicanFZJ80]

Any installed pictures? Curious and would like to do some visual analysis, as my engine bay is pretty packed, and has gone through multiple reconfiguration.

 

[landtank]

It’s looks no different than a typical SC install. Actually there is more room between the fire wall and the air intake tube that comes off the MAF housing.

 

[DominicanFZJ80]

10-4.
Don't tell me there is more room after install! Just means I'll be able to fit more stuff under there
Should I work with you to procure a kit, as Wits-End site states to contact, or reach out to Joey?

 

[landtank]

Contact Joey.

 

[Raad]

part of the kit is new spacers and bolts for the fuel rail. There was no issue installing them. And still running the stock FPR.

Another change is that the hose section on the new MAF is larger than the stock one. So 2 90* elbows and a piece of tubing replace the "U" shaped section that goes from the MAF to the throttle body.

Hello,
Any info about the spacers and bolts or just I cut the stock once? thanks

 

[landtank]

My kits include the spacers and bolts.

 

[ToyotaTechnical]

My kits include the spacers and bolts.

Are these kits in production still? Do not see them listed on the website.

 

[landtank]

Working on bringing them back. My truck was having running issues and I’ve just finished reworking the entire fueling system.