1985 HJ75 Pickup

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Here you go Alberto ......... :)

image.webp
 
The extra height of the tires look better in my opinion. The aggressive thread pattern produces a "tad" more noise at road speeds. :)

image.webp
 
what a pretty poseur truck ...:flipoff2:

:D

I could Google "poseur" but I am sure it would just end up hurting my feelings. :flipoff2:

There is a 50% chance the BJ might actually be driven on dirt.
There is a 30% chance the brush bar will be used for something other that holding driving lights.
There is a 20% chance the winch will ever be used.
There is a 10% chance the air lockers will ever be used.
There is a 0% chance I will put it in a situation where it might get scratched.
...... Is that the definition of a Poseur? ........ :D
-------------------------------------------------------------------

Crushers ......nah, when i die ... mud will hold my eulogy and tribute of sayings ...
<unless Woody suddenly decides to delete my memory.>
-------------------------------------------------------------------
I hope Woody allows me to add a couple of "Charlesisms" to the eulogy.
 
Last edited:
The definition doesn't really matter in this case. That is a sweet ride period.


How accessible is the PTO shift lever in that bumper?
 
The definition doesn't really matter in this case. That is a sweet ride period.


How accessible is the PTO shift lever in that bumper?

Just to the left of the shifter.......

image.webp
 
About 1/2 second after I hit the send button I realized you were asking a different question.
 
No worries ........
Wayne has a daily routine....
Sprinkles Metamucil on his maple syrup flavored oat mill and has breakfast and then grabs his computer to jerk my string.
I in turn eat grits with small bits of bacon and use the down time to figure out a way to get him back. :D
It's that "circle of life" thing....... :)
 
So Charles...can I come down and grab that for the weekend next weekend?

I asked CDan and he said "pound sand grasshoppa."


Keys are usually in the ignition....... :)
Can you wait a few more days so I can get the HJ75 back?
If not I would have to drive my wife's 4Runner and that's just embarrassing.
 
Last edited:
Cool, thank you.

What is the spacer thickness under the rear winch mount crossmember? Please sir?:)
 
the IMPORTANT question is, how accessible is the sheer pin to replace?

CDan et all,
Charles is a cool guy with great toys but someone has to keep his feet on the ground.
 
Cool, thank you.

What is the spacer thickness under the rear winch mount crossmember? Please sir?:)

Approximately 1/4" stainless spacer.

image.webp
 
Thank you.

I like that setup.
 

Users who are viewing this thread

Back
Top Bottom