pb4ugo
SILVER Star
This is from a printed Dec. 1974 2f engine manual. What are you trying to achieve? Is there a problem?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The coil only discharges when the dizzy points are closed, so just like a tach your meter should be sensing this rate and duration (dwell) of each discharge. Since your meter does this with built in functionality it doesn’t need an induction reading probe which would connect to a plug wire. Also why your meter (PT) is more expensive than others . Make sure red is connected to the negative terminal of the coil, and the black to a chassis ground.
How do you adjust Dwell on a ‘78 Semi-Transistorized Ignition (no Points)? When I measured the Dwell on my Meter it was around 30-32. Do you adjust the Air-Gap?
How do you adjust Dwell on a ‘78 Semi-Transistorized Ignition (no Points)? When I measured the Dwell on my Meter it was around 30-32. Do you adjust the Air-Gap?