panhard

My HDJ81 came from Japan with an after-market dual-side adjustable panhard bar and a drop bracket. Can anyone identify the brand / model of this panhard bar so I can double check bushing size and determine if I can use an OEM bushing. My caliper measurement shows 38 mm ID, while I understand...

~4 weeks ago I had our LC lifted by pros with a Kings kit from Filthy motorsports, and had the installer use the Dr KDSS bracket to fix the rear panhard bar angle as part of the install. Spidertrax spacers were installed as well to prevent the front wheels from rubbing. The installer marked...

Decided to go a different route for the panhard correction New in bag

As the title says, I'm in WA. Thanks MUD!

Weld-on panhard correction kit for 200-series. This will help reduce the bum wiggle/uneasy feeling/imbalanced suspension response out of your lifted 200. $85 shipped.

I've had EFS single-nut adjustable panhards on the 80 from way back. Today to temporarily sort out the punctured rear tyre issue while I get a repair kit I took two of the three Toyota factory 16 x 8 wheels with the 285/75-r16's off my box trailer (I only have three of them) with Chinese...

I'm looking for a few upgraded miscellaneous parts to be paired with my Ironman FCP 2" lift. Extended sway bar links Panhard correction kit Bump stops (aftermarket) I'm running a 1999 LX470 and am located in Atlanta.

Good Morning from Vancouver, BC I have had mega wobble issues with my LJ78. We lifted the truck and tested the wheels for play. Plenty of play front left to right. I took it into a shop in December and the panhard bushings were replaced. When I brought it back to further address the wobble...

All parts are local pickup here in Socal and they came off my 93. You can shoot me a text at 562-665-8453 - Kyle Also here's a link to my offerup, I post stuff I have for sale there. https://offerup.co/profile/kl240 FJ80 OEM LCAs $40 for the set FJ80 OEM Panhard Bars $40 for the set...

I did a "longish" term review on the @Ironman 4x4 USA UCAs a months ago after I put them through the wringer and now Its time for my Rear Lower and Upper Control Arm and Panhard review. If you follow me you know ive had constant issues with bending rear control arms and panhard bars. The rocks...

So I was rear ended at a stop light by a Subaru doing about 70mph who never touched the brakes. Very long story short now I suspect my Panhard Bar and frame are tweaked ( along with a lot of body damage) Unfortunately I have nothing to compare to, so before I go crawling under someone cruiser in...

Installed my new @Delta VS Panhard Lift Bracket this afternoon....the claimed 15 minute install is MUCH greater on a well worked POS like mine, but the effort was 1000% worth it... $250 well spent. NO more rear end wiggle when in/out of the throttle. Able to go back to a stock rear panhard...

Has anyone noticed and/or addressed a torque steer issue on their 200? I recently had my 200 lifted with the OME/SPC UCA Kit by the fine folks at Slee Offroad, didn't visually notice that the rear axle had moved one way or another, alignment was done at their shop (specs look great on paper)...

Hey Folks, I purchased an adjustable front and rear panhard rod to try and shift my axles back to center. I'm running a 3inch suspension and adjusted the panhard rods about 1/4 inch longer than stock (was the recommended length). The axles are still about a 1/2inch further to right. Do I just...

Both of the the rear Ironman (#PAMHARD002) panhard rod Polyurethane bushings are done. Want to go back to OME bushings. Does anybody know the dimensions of the OEM ones? Hope the fit!

Hi all, Was wondering if anyone who has both trucks could tell me if an adjustable panhard out of an 80 will fit the 100?