igniter

1994 fzj80. Did a complete tear down on the engine, sent to the machine shop and rebuilt the block and head. Replaced several of the connectors and checked the wiring harness and rewrapped it. Most of the wrap and wire looms were gone and wires were shorting out. Started and ran pretty well...

Needing some replacements for the old 3FE. As you all probably know, non-OEM don't do **** for these rigs. Cheers!

So I was driving back from the bank and my 1991 80 series just stopped running. I started checking the usual suspects EFI relay, fusible link, battery cables. None of that made since because I still had CEL. Waited 5 minutes and cranked and it started. I parked it at the house and now it won't...

Good Afternoon, Everyone, Is there anyone who could share a picture of the correct connections between the igniter and ignition coil on an FJ 60? Thank you! -David

Ok i tried to search this up found a few articles but I have the following problem. My tach went out came here read a little and replaced the igniter, that did not work so I buy a complete dash unit replace the igniter because it was bad, put the new to me dash in, and it worked for about a...

What would be the best igniter on the market for this setup? I have a 1978 FJ40.

Hi, My ignition coil broke on my 1983 Toyota FJ40. The car came from Colombia. The pictures show the ignition coil that broke, the igniter, and the plate of the car with the model number and VIN. I am having a hard time finding a replacement. Any help would be much appreciated. Thank you

Hi, So, my igniter broke. I can’t see the model number on it and I am afraid of purchasing the wrong one. Can some please recommend a good replacement for it? I have a 1983 Land Cruiser FJ40. It looks like this is it. But, an experts opinion would be awesome...

I picked up the appropriate plug for my alternator from @Coolerman and have a yellow and black/yellow wire now. But, no idea what wires they connect to on the 74 harness. Diagram says W, WG, WB but no wires like that near PS fender. By the igniter I have a BY and a B wire. ?? By the charcoal...

any idea where i can get good quality igniter for 3FE?

Mechanic has identified Igniter as the culprit of not starting. Are there two parts inside that housing, or is it all one part? Alternatives if its not available?

This regards my 1988 FJ62 with original 3F-E engine. I've been running through the electricals trying to determine why the engine cranks beautifully (and I smell gas so I believe it's not a fuel pump issue) but I get no firing. No sparky at plugs; no voltage at igniter wires as they enter the...

This afternoon I tested a used '78 2F igniter in my '76 FJ40 with FJ60 distributor. I wanted to ensure the igniter would work with a 1/75 through 9/77 2F distributor converted to Toyota electronic ignition. Over the past few days I spent several hours searching the MUD forums and other Internet...

I'm looking for a replacement for my Igniter & coil. Part numbers: 19070-61080 Pic attached.

Hello everyone, noobie here! I am attempting to fix up some of the wiring on my car and want to make sure I am doing it correctly. Please see the pics for labels to my 4 questions. A) I believe the BY wire from the + terminal of the ignition coil is supposed to connect to this terminal on...

I spent the day trying to get both an analog and digital tach to work on my "spare" 2F engine that has the hybrid points-igniter system. I tried getting the signal off the coil at the negative terminal, and also at the distributor lug for the points. Could not get a signal at either point. I...

Complete coil and ignition assembly for 75-76 2f systems. Works good. $75 plus shipping.

Ignition assembly including coil, igniter good shape from running FJ40. 1975-1976 models OEM. $75 plus shipping

Hey guys, probably a dumb question, but what exactly is this thing circled in yellow? And, what does it do? And, now that my wires have been smoked/burnt in the areas circled green, what does that mean for internals? It looks like a little capacitor that comes from the ground of the battery...

Hey y’all! I’m in need of someone smarter than I when it comes to early efi on the 22re. My 85 4Runner will only run on the cold start injector, then dies. New fuel pump, starter, efi relay, open circuit relay, and grounds cleaned or replaced. Any input on where to look? Got it to pop code 10...