Hi All - I got a 60 series a few months back. Total newb, long story, but I've been trying to fix her up as a hobby to give me something to do and learn about cars finally.
I have been using the forums to do all sorts of work, so thanks for all the help. Replaced the PCV valve, exhaust...
I drained the pan, 2004 100 series. I got about 2.75 qts out. I went to fill and realized I wasn’t prepared- no dipstick and I didn’t have the right kind of transfer pump or the 24mm socket. I found a small 12mm plug in front of the linkage right above the pan and managed to get the new fluid in...
New OEM, part number 64739-90K01-B0. Application is FJ62 but I think should fit all 60 series.
$20 plus $9.50 shipping.
compare to Proffitt's 3d printed one at $50.
https://parts.resurrectionlandcruisers.com/products/fj60-3d-printed-rear-windshield-reservoir-access-cover
Hi
I searched the forum and found some conflicting information. My transfer case fill plug is stripped so I need to buy a new one. Does anyone know the part numbers? I have 90341-18039 for the fill plug? is this correct or is there an alternate part number? Does anyone have the drain plug...
Does anyone with one of the early LRA auxiliary tanks have trouble filling the main tank? Anything much faster than a trickle backs up.
What I've already done:
blew out lines, confirmed no obstruction
replaced breather filter
added strap to prevent kinking in fill hose below the metal, upper...
Do not defer your 2F coolant flushing.…
The FSM says to “change coolant if excessively dirty”. Well, my coolant was a 50/50 mix of Toyota coolant and did not appear dirty but wanted to flush and fill anyway. Glad I did.
First, my radiator is an aftermarket 4 row type made by CSF. The drain...
I want to ask, if I were to suction out all of the brake fluid (Toyota DOT3: 00475-1BF03) from the reservoir of my 100LC, does the new fluid that I put in eventually cycle through the whole brake system? Could doing this a few times be the lazy man's way to incorporate new brake fluid without...
Does anyone know if the fuel fill from a 105 will fit on an 80 series truck? Just trying to plan out a sub tank install and the 105's are cheaper. Any other parts compatibility between the two models?