belt

This OEM serpentine belt was installed along with a "new" remanufactured OEM alternator in Dec. 2022 at 119,600 miles, which was ~14k miles ago. In Feb 2024 at 125,200 miles, or approx 8k miles ago, an indy shop in Corvallis OR replaced the tensioner, when my kid had the vehicle up there while...

Hi 100 series gang, Last week my cooling fan clutch on my 2000 LX470 started giving me issues. It squeaks intermittently and now it’s locked in the “engaged” state 100% of the time. (304k miles) I can’t spin the fan by hand (with the engine off of course) without the pulley turning with it...

Hello, I am replacing timing belt for the first time, and I wasn't sure of the alignment I got. I matched all the marks when installing, rotated the engine several times, and finally pulled the tensioner. After that I ended up with the following situation. Is this considered aligned or not?

Condition mostly doesn't matter since I’ll be restoring them, but I do want some that are restorable, eg not missing major parts or chewed up badly a dog. Pics for reference: Front belts: Need the buckle for each side as well: rear set

Looking to purchase Front passenger side seat belt 100 series, gray color Will send shipping label

Crawled under the old girl yesterday to check for leaks after engine install and test drive, and I noticed that the belt is rubbing on the smog pump delete bracket. See attached pic. Everything appears to be together correctly, I’m assuming this should be so tight of a clearance. Any idea...

Is it possible to bypass the A/C compressor on a 1999 LX470? -Does anyone know what size belt? The compressor still works, but the bearing on the pulley sounds like gravel. I am hoping to keep the car on the road while I pull the pulley and decide whether I can replace the bearing or need to...

Hi all Just trying to find when my timing belt was done / is due and can’t seem to find any information There is however a Japanese sticker that says replace every 100,000 It’s 25 years old with no history prior to import and has 71k on the odomiter Would I need to change the belt...

I’m seeing two versions listed, but I don’t know which I need. Mine is the one in the left diagram, 88310A, without the viscous heater. 1998 JDM HDJ101. Is it 99364-31240 or is it 99364-31720? I can’t find which is which. Thanks.

I would appreciate someone giving me the wire colors going to each of the three spade connectors on the mid-70s FJ40 seatbelt warning relay. (Passenger side footwell on the firewall) Thanks.

An easy fix, the peace of material removed and all is working now. Mild contortionist skills 14mm socket Needle nose pliers Sense of humor

Quick post for anyone who needs to do this. My 2016 Tundra tensioner pully has been making noise. A lot worse when it's cold out. After about 4 months on backorder I finally got a new tensioner pully a few weeks ago. It's a DAYCO brand direct from Toyota dealership in Toyota box. Also replaced...

So in the spirit of Christmas and the fact I learned that my 2009 200 series interior trim is actually dark brown (E0) not black (C0), I have three interior parts up for grabs. If you are missing a luggage hook and cover $4 for the shipping I'll mail you one (I have two total). I'd rather send...

New in box OEM Toyota/Lexus A/C Belt Tensioner p/n:16620-0W101 Fits most Toyota 4.7L V8 Buyer pays shipping, only accept Paypal Goods/Services. $60

My driver seat seatbelt is beyond nasty. 20+ years driven by the previous owners, I think it's beyond cleaning. Does anyone have any affordable recommendations for replacement?

My battery won't charge on hot days. I think it might be the alternator belt stretching. I can't think of anything else that could cuase this has anyone run into the same problem and how did you fix it?

FS - Seat belt assembly Front seat - PN 73230-60460-B0 Sold rig before I got to install. Can help with Airbag light or seatbelt light if on. Asking $50 shipped USA

sorry: posted in wrong forum. Please delete this topic

In need of a water pump pulley with 2 belt grooves, for a 78 FJ40 2F, please pm if you have anything. Thank You, Noah

The belt molding on my LX450 looks like crap. It's cracked, jagged, and missing little pieces everywhere. The pricing for OEM replacements seems crazy. Has anyone tried these (or any other cheaper options) and been happy/unhappy with them...