- Thread starter
- #321
Making some progress
green pig 72 (1 Viewer)
- Thread starter 71greenpig
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Making some progress
- Thread starter
- #322
Feeling accomplished for today. Front hung everything loose for now.
- Thread starter
- #323
Guess I was to excited. Broke two bolts off. A bolt on each rear hangers.
Last edited:
bobm
WTF, WTF, WTF!!!!
I wouldnt grind them bushings. Grease em before assembly use a BFH to straighten out the hanger. Or a porto power
BFH is always the answer
- Thread starter
- #326
Could not take it. Had to go back and undo passenger side fixed shackle it looked twisted. Sure enough it was. Two steps forward one step back.
- Thread starter
- #327
Feeling better today. Got the front springs reseated correctly. U-bolts hand tight(will have to cut some off) Started on the back. Got both bolts out I broke and retapped. Going to tackle hanger moving back next I think. Progress either way…old parts stacking up.
- Thread starter
- #328
Little more progress.
Here a some pictures of new springs length vs old shackle location. Don’t mind the little red wagon, sometimes you need a helper.
Here a some pictures of new springs length vs old shackle location. Don’t mind the little red wagon, sometimes you need a helper.
- Thread starter
- #329
RUSH55
SILVER Star
Yeah buddy! Now you’re getting it
- Thread starter
- #331
Moving that rear hanger back going to be the death of me. Picked up a air chisel today and a die grinder.
- Thread starter
- #332
Air chisel game changer. Got 5 heads off of rivets them dude still don’t want to come out. Going to pick up new bits on Monday.
- Thread starter
- #333
Had to stop and do little dad duty…the boys wanted to ride their ATVs…
- Thread starter
- #334
RUSH55
SILVER Star
I just moved the hanger exactly per the instructions. Center of hole to center of hole. No more, no less.
And yes, I had to sand my bushings a bit too.
And yes, I had to sand my bushings a bit too.
looks good from my house.
- Thread starter
- #338
Ok, men 5” center to center. Got all holes drilled. Hope all down hill from here. Those rivets almost won.
bobm
WTF, WTF, WTF!!!!
Nah! Any leaf spring mod is a Bitch! Dont matter if truck is 2 years old or 40 + still the same process! Heavy Metal 
- Thread starter
- #340
You would think I had completed the lift today I was so excited about getting those rear hangers moved and set up.Nah! Any leaf spring mod is a Bitch! Dont matter if truck is 2 years old or 40 + still the same process! Heavy Metal
