Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
looks like a stock toyota bucket in an early truck
so this is a modified setup, bucket seat and support structure fabbed in where there would have been a tube frame supported 60/40 bench setup?
I'll be doing this modification later this year on my '71 FJ40. I have a complete set of brackets, hardware, and support frame parts from a '73 to '78 FJ40. I plan on using FJ60 bucket seats on the FJ40 mounts. Do you have any photos showing how you supported the outside drivers side rail to clear the tool box?Wasn't a tube frame and it mount on top of the toolbox. Clip held it down in the front and it pivoted up off a couple of bracket in the back. Pin held the seat in to the rear brackets. Remove the pins slide the seat sideways it was free and could be removed. The setup up shown in the picture is stock for 73-78 seats. That includes the front left bracket. I just figured a way to move that outside the toolbox.
Thanks for the reply. Photos would be appreciated, but no hurry.I can get some pictures. What I used was one of the upper brackets used on the hard top at the back. The side of the toolbox next to the transmission cover has to be notched for the front bracket used for the inside of both seats.
Thanks for the reply. Photos would be appreciated, but no hurry.
Thanks for the photos. That gives me an idea for using a 60-Series exhaust hanger bracket.
View attachment 1749872