SmoothLC's latest activity
-
SmoothLC reacted to cruiserpatch's post in the thread Cruiser Patch 100 Series Products Thread with
Haha.
Whoops I'm behind on this thread big time... Here are some additions... (no particular order) 100 Series Fender Apron clips 100 Series fender apron clip no.2 Fender apron clip (larger) I should just make a kit for these... I used to run Rad... -
$500-700 seems to be the going rate. Check the parting out section here. Most junkyards will negotiate on the price. Here's one on eBay for $500 plus tax, shipped. Also consider an LC hood if you ever wanted to switch it up for an LC front end...
-
SmoothLC reacted to NearJetties's post in the thread What have you done to your 100 Series this week? with
Like.
making progress -
SmoothLC reacted to Unrulykid's post in the thread What have you done to your 100 Series this week? with Like.
I used an AC coil cleaning kit to remove funky smells when the AC is turned off… Did a little searching and found that the $40 Toyota kit is made by ZEP for Toyota… Heads up… Turns out that the $18 Subaru kit ( made by ZEP for Subaru) is...
-
SmoothLC reacted to Trunk Monkey's post in the thread 2” hitch receiver: bumper or frame mount? with Like.
I would rather scrape the bumper/hitch than the frame, also makes a built in recovery point.
-
SmoothLC reacted to OEMGUY0720's post in the thread What have you done to your 100 Series this week? with Like.
Got the new fuel pump installed after our brief drive back home from SLC to Vegas with an intermittent P0171 (system too lean for about 450 miles). Ran diagnostics after the first start up, short and long term fuel trims came out good and...
-
SmoothLC reacted to Olgx460's post in the thread Rear tire carrier - Do you guys leave them on all the time? with Like.
-
SmoothLC replied to the thread RIGd Ultraswing Mega on a 100 series.Bringing back an old thread. Does anyone know if a spacer is required to fit 18 inch Tundra TRD Pro wheels on the UltraSwing Mega-Fit?
-
-
SmoothLC reacted to bridgeburner's post in the thread Rigd Ultraswing on LX470 bumper hitch mount with Like.
I’ve got @blackohio s old 100 with an ultra swing. This truck has the lower hitch mounting location below the bumper. I’ve found that there’s a sweet spot for opening the swing out and lowering the tailgate to make sure to not damage the...
-
SmoothLC reacted to OCGX's post in the thread Pictures of Wilco hitchgate and Rigd Ultraswing with 1up bike carrier? with Like.
I ran the Wilco tire carrier for maybe six months in 2019/2020. I was scraping it all the time on, totally kills any departure angles. First I changed the GX hitch to a 4Runner hitch. This brought the swingout a little closer and higher. It...
-
After months of trying to decide which spare tire carrier to go with I decided on the Ultraswing by RIGd Supply. This thing is SOLID. Was down on the glades the past 5 days and this thing didn’t wobble, squeak or move. I knew there had to be...
-
SmoothLC reacted to BBiondello's post in the thread What have you done to your 100 Series this week? with Like.
Cut out the front license plate holder (fortunately only need a rear in my state) to hide away this Rigid 30” light bar. Fits perfectly!
-
GCC HZJ105 in Dolomites, Italy enjoying some ascents
-
SmoothLC reacted to nickandrews's post in the thread Media The MUD 100 series Photos thread with Like.
Camping trip with the family... Middle Fork Passing on the joy of Land Cruisers View from camp
-
SmoothLC reacted to Somebodyelse5's post in the thread What did you do with your bike this weekend? with Like.
Send pics, be safe. Drive fast. Take chances.
-
Made it down to some Guadalupe River flood debris. The pics don't convey the size of those trunks
-
As of 3 days ago, I'm back on this. I'm going with a local upholstery shop - they did my '84 Pickup and did a great job - to do the front two rows, arm rests, etc. custom (not a kit). I'm scheduling it today, hoping to get on their schedule in...
-
SmoothLC replied to the thread Did you ride today?.Nice work!
-
back to the mountains to ride some more. we started off in the alberta badlands at a family reunion. my brother in law wanted to warm up by climbing some of the badlands hills. my 16 year old has become a very strong climber so my wife placed a...
-
@ little Joe: Heal up well! I did some MTB rides with my wife and some friends on the Kingdom Trails in East Burke, Vermont.
-
SmoothLC reacted to eatSleepWoof's post in the thread eatSleepWoof's 2019 Erwin Hymer Touring GT550 with Like.
This is the third trailer we've owned this year. Really hoping this one sticks around for a while :). I've been "trailer hunting" ever since we came back from a 5-day, 4-night camping trip a few weeks ago. We (yet again) decided that a RTT isn't...
-
Just finished building my super simple sleeping platform. I wanted it to be minimal weight, easy to access everything under it, and not require the second row seats for support (will remove 2nd row for longer trips).
-
Maybe a video is in order?!
-
Yes, exactly. All that thermal mass makes the temperature easy to maintain fairly constant, but the downside is that it takes forever (weeks anyway?) to change it. My wife plays the harp; those are only two of about seven or eight that she...
-
Realized it was time for another update, but some major things have happened: Had to wait a week or so since the last few posts for an HVAC professional friend to come by and blow out my lines, pressure test them, and vacuum down the system for...
