Outsane's latest activity

Some one asked me for an ambulance door cover.. So I made one..its printed and cheaper then most used ones (won't rust). https://solvefunction.com/shop/ols/products/ambulance-door-panel Now thats its added out, I can have these made of...

Thank @FJ73Texas for sending the original

Made some adjustments to the dimensions https://solvefunction.com/shop/ols/products/zx-badge-75441-60230

I added and made a few, i haven't found the perfect gold yet.

The buyer is the guy the rest of us cosplay as when we're Broverlanding. Spends a year at a time out on trails. One of his objectives is to cross through the Darien gap in the next 2 years.

@Delta VS now makes the photogenic kit, its great. https://www.deltavs.com/all-products/1fz-alternator-upgrade-kit-and-components

Got the @Outsane Whiteline rear sway bar brackets installed...love these! They put a nice slide angle from the rear lower link mounts off of the rear of the axle so it doesn't bash the sway bar mounts. Also installed (but not shown) Window...

😪

That's rad. I've been slowly adding tools to my collection every time I run into a snag. Works well if you don't have to daily the truck and it can be down long enough for a HF run or Amazon Prime. I'm getting to the point where I have a decent...

What’s wrong with yours? @Outsane sells 3d printed bushing to bring them back to life. https://solvefunction.com/shop/ols/products/vent-bushing-thing

Some pictures

Dash is almost completely finished - just need to wire the driving lights and reinstall the glove box. Incidentally, this Powerwerx Panel Mount 65W Combo USB-C PD & USB-A Fast Device Charger fits nicely in the place of the stock cigarette...

Thx! The rear doors turned out great, and Julia has been killing it on the vapor barrier restoration: We ended up deleting the factory amp & removing it altogether for simplicity, and I was surprised to find out that the little dash...

The best shock will depend on use Find a shock tuner you like and ask what shock they like to tune. Buy those and have them tune them to your rig and riding style. Shocks are very dependent on driver and style.

Changed my oil today and it was red, you guys ever seen that before? jk jk it's time to get this transmission out of here. Took off the PDI trans cooler and removed the lines. The cooler is riveted onto a bracket and bolted onto the...

Current state: I haven't had a Land Cruiser build in my life for a couple years and I've missed it. Just ditched my '20 Tacoma 6-speed. Fun to drive but at the end of the day, not a great platform. Test drove everything from PXLs and 200...

Going with a 1hdt for the #Diesel build mated to a h150 transmission 300mm flywheel and a short tranfercase with 3.1 low I am hoping the gearing will be good with 37's.. but not totally sure.. I still need lots of parts,, one of the big...

ZX or XZ badges made

Made our way out to Ouray Colorado for SAS Stayed at our favorite campground in Cider City Sassy our we there yetSpent most of yesterday at the Ouray hot springs 😁 Chilln at the campground this morning

🙆‍♂️ thank you

That's pretty cool, I'll help where I can. I make a bunch of stuff for the 80 series.

Oh cool stuff! Oh cool stuff! All kinds of good things in there!

Nope no text on the light

I wish someone would make the air intake horn for the later model (79+) FJ40 from a 3d printed material. Idgaf if it’s plastic.