Things TO-DO before GSMTR 2013 (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Install 4" ironman-DONE.

image-859957613.jpg



Plug wires-DONE
Rotor cap & button-DONE
Thermostat-DONE
Upper rad hose-DONE
Lower rad hoses-DONE

Finish rear cargo box-

image-859957613.jpg
 
Lift looks good, glad someone is marking things off, mine seems to be growing....

jynx said:
So my To-Do

-Sort out my dead headlights - DONE
-Finish installing my LED Bar - mounted, have to wire
-Install Slee headlight harness
-Install new Alternator
-Install fusible links
-Plugs, wires, rotor & cap
-Change Belts
-Check knuckles & grease as needed
-Paint and install my White Knuckle Sliders when the get here
-Firm up the Battery retainer, it moves too much for me these days
-Order and install a pair of military battery clamps
-EGR removal (this one may have to wait until after)
-Sort out my winch controller
-Change Oil and Filter
-Check Diffs, change as needed
-Have AC serviced :)princess: has made this a priority!)
-replace passenger side mirror
-replace hatch struts
-replace LCAs
-adjust valves and install new valve cover gasket
-replace pcv and grommet
-replace thermostat
-change waterpump-maybe
-order new air filter
Click to expand...

Got all but AC belt off, pulled shroud and fan, got intake off and I'm almost ready to pull valve cover. Bad part is the further in I go the more I feel like I should go ahead and do "while I'm in there" Got the headlight switch re-pinned and reinstalled. Also got the ELS bar mounted, and I am trying to decide if I can reuse the PIAA harness to power it for now.

Anyway, here's the carnage to-date

ForumRunner_20130413_195432.jpg

ForumRunner_20130413_195432.jpg
 
Got slider shipping notification today, should arrive 4/22. Ready to install alternator, but realized last night that I will be doing the "90A Mod" on it, so what I thought would be an easy bolt-in turned into another project itself. Just need to do a little grinding and I will be set.
 
Got the pinion/carrier bearing puller today and the gears from Marlin should be here Friday. Hopefully this weekend I can get the V6 w/Detroit back in and get this dang welded diff out. I hate the quirks of the welded rear.

Last thing after the diff is to flip my tires on the rims. I'm so not looking forward to that task. Probly gonna get some guys over to help so I don't have to do all 4 by myself.

IH8MUD on Android
 
4xsteve said:
Last thing after the diff is to flip my tires on the rims. I'm so not looking forward to that task. Probly gonna get some guys over to help so I don't have to do all 4 by myself.

IH8MUD on Android
Click to expand...

I hear ya, just redid all my beadlocks after the chocco run a couple weeks ago. all new hardware and a repaint, took all frickin' day.
 
I'm knocking my list down day by day (with some help). My test run is this weekend so my deadline is a good bit before GSMTR. I just got my front drive shaft back so I should be able to get that in tomorrow. Then I just need to stick the exhaust back on and see if I can make my fan shroud fit. Should be good to go after that.

Sent from another Galaxy
 
Hugh Heifer said:
Happy wife, happy life :meh:

Posted from a brick.
Click to expand...

Good quote to have in your signature!!!
 
One of the items on my list before GSMTR is to go to Oliver Springs/Oakridge and order items needed for the Friday night cook out and some other item we need. I thought I would go to Southern's Trailfest on May 3rd & 4th. Plan on arriving early on Friday and doing my shopping then on Saturday I want to run trails 22/42/43 over to Frozen Head State Park to see if it is an easy or moderate wagon friendly trail and check the time. If it works out we will use this for one of the guided rides. I would like some one to ride it with me, not likely to find someone at Trailfest that wants to ride that easy of trail, so would one of you east TN guys want to come ride with me on Saturday May 4 ?
 
DSLTOY said:
One of the items on my list before GSMTR is to go to Oliver Springs/Oakridge and order items needed for the Friday night cook out and some other item we need. I thought I would go to Southern's Trailfest on May 3rd & 4th. Plan on arriving early on Friday and doing my shopping then on Saturday I want to run trails 22/42/43 over to Frozen Head State Park to see if it is an easy or moderate wagon friendly trail and check the time. If it works out we will use this for one of the guided rides. I would like some one to ride it with me, not likely to find someone at Trailfest that wants to ride that easy of trail, so would one of you east TN guys want to come ride with me on Saturday May 4 ?
Click to expand...

I would if it was any other weekend! My wife's bday is the 4th and we are going to Mt. Pisgah in NC.
 
Last edited:
DSLTOY said:
One of the items on my list before GSMTR is to go to Oliver Springs/Oakridge and order items needed for the Friday night cook out and some other item we need. I thought I would go to Southern's Trailfest on May 3rd & 4th. Plan on arriving early on Friday and doing my shopping then on Saturday I want to run trails 22/42/43 over to Frozen Head State Park to see if it is an easy or moderate wagon friendly trail and check the time. If it works out we will use this for one of the guided rides. I would like some one to ride it with me, not likely to find someone at Trailfest that wants to ride that easy of trail, so would one of you east TN guys want to come ride with me on Saturday May 4 ?
Click to expand...
I feel like I need to do more. I will try to get Friday off and meet you Roger. I will drive the 100. I will call you or email you to firm it up.
Guess I need to register for Trailfest?
 
DSLTOY said:
One of the items on my list before GSMTR is to go to Oliver Springs/Oakridge and order items needed for the Friday night cook out and some other item we need. I thought I would go to Southern's Trailfest on May 3rd & 4th. Plan on arriving early on Friday and doing my shopping then on Saturday I want to run trails 22/42/43 over to Frozen Head State Park to see if it is an easy or moderate wagon friendly trail and check the time. If it works out we will use this for one of the guided rides. I would like some one to ride it with me, not likely to find someone at Trailfest that wants to ride that easy of trail, so would one of you east TN guys want to come ride with me on Saturday May 4 ?
Click to expand...

There is a good chance I can do a ride on that Saturday. I need to get my truck out.
 
That would be great. I will camped in the event area Friday night. We can meet up at the trailhead, let me know what time is good for you.
 
Sliders.... check. I am pretty happy with them in natural steel, so just gonna clear them and bolt them on. Also got a box from LOWE today, so now it's on like Donkey Kong! 23 days til we have to roll East (leaving on Thursday).... this chit just got serious!

Any recommendations on clear?
 
Last edited:
Front coils finally showed up still have to assemble the coil overs, diffs are supposed to done tomorrow, just pick up new to me tires from Rance, and 3 days off work got my fingers crossed it all will come together.

Sent from my detachment from reality.
 
jason in tn said:
Front coils finally showed up still have to assemble the coil overs, diffs are supposed to done tomorrow, just pick up new to me tires from Rance, and 3 days off work got my fingers crossed it all will come together.

Sent from my detachment from reality.
Click to expand...

Cool! Where did you order the coils from?
 
You must log in or register to reply here.

Similar threads

SteveNJ
GSMTR newbie question
Replies
11
Views
1K
SteveNJ
SteveNJ
Hugh Heifer
GSMTR 34 Rego Now Open!
Replies
1
Views
408
Hugh Heifer
Hugh Heifer
tacoma2002
2025 Razorback Ramble May 29th to June 1st
Replies
0
Views
236
tacoma2002
tacoma2002

Users who are viewing this thread

Total: 3 (members: 0, guests: 3)

Share this page

Back
Top Bottom