- Thread starter
- #121
Damn that looks proper!Nomad Arvo 502 0mm offset, BFG KO2 285/75/17 and OME 2". No KDSS, no BMC, inner liner and some rocker plastic trimming.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Damn that looks proper!Nomad Arvo 502 0mm offset, BFG KO2 285/75/17 and OME 2". No KDSS, no BMC, inner liner and some rocker plastic trimming.
Nomad Arvo 502 0mm offset, BFG KO2 285/75/17 and OME 2". No KDSS, no BMC, inner liner and some rocker plastic trimming.
Hey man i missed this! Congrats Tex, Looks sick! Your patience paid off.
Now do me a favor and dechrome that bad boy.
Hmm those are already in production @turbo8 ?
Looks great! I’m about to do the same tires but with 17” Icons with 25mm offset. You said above you had to trim the rocker panel. Got any pics?Nomad Arvo 502 0mm offset, BFG KO2 285/75/17 and OME 2". No KDSS, no BMC, inner liner and some rocker plastic trimming.
Looks great! I’m about to do the same tires but with 17” Icons with 25mm offset. You said above you had to trim the rocker panel. Got any pics?
I’m at the tire shop. I don’t see the rocker panel clearing but will know here shortly.I’ll grab some pics this evening.
I’m at the tire shop. I don’t see the rocker panel clearing but will know here shortly.
Edit: it clears the rocker so won’t need to trim for that. It just touches KDSS at full lock which I was expecting.
2013 LC. Zero off set might be why you don’t hit KDSS.Sorry, I haven't been back to the house to grab a pic just yet. Glad to hear that they cleared for you. What size tires and make/model? I am sure that plays a part in why you're touching the KDSS arm and I am not.
2013 LC. Zero off set might be why you don’t hit KDSS.
Ahhh yea, didn't see that you are running a +25mm offset. Pics?
Definitely need to test under suspension compression—especially while turning and taking a big dip or obstacle. If you don’t, you may find out the hard way at speed. Remember that compression via a jack or ramp/wall when stationary can’t replicate the travel at speed where momentum multiplies compression.I test fit my 35-12.50-17 the other day. All
Good other than rear plastic and body mount. Clears the kdss by 1/2” or more.
View attachment 3231558
View attachment 3245743View attachment 3245744
I think I will trim the corners off the rocker panels. I’ve already trashed one that I had to replace because a rock of stick got wedged between the tire and wheel.
Ouch. I had hammered the metal bracket that’s behind the mud flap to make clearance in that area, but that stick or rock took it to the next levelHere’s my chewed up rocker. I’d like to just cut the end of the rockers off and make a 3D printed cap that provides better clearance.
View attachment 3245774
I’m getting the heat gun this weekend, for the inner fender. Made the minor cuts. 0 offset Fifteen52 wheels, 285/75/17
View attachment 3231541
View attachment 3231542
View attachment 3231543
Just received the same wheels, excited to get them mounted. I noticed you wrote 285/75 but these appear to be 70, fyi. You had me thinking I ordered the wrong size tires for a moment!I’m getting the heat gun this weekend, for the inner fender. Made the minor cuts. 0 offset Fifteen52 wheels, 285/75/17
View attachment 3231541
View attachment 3231542
View attachment 3231543