Hi all!
Just wanted to share my solution when getting weak vacuum recovery on multiple brake applications. Especially when upgraded to a dual diaphragm brake booster.
The solution is based on a standard vacuum pump and is using both vacuum chambers in the reservoir tank. It keeps the low vacuum pressure warning if installed.
Link the brake booster vacuum hose with a Y or a T connection to the clutch booster and get more recovery vacuum pressure.
(Edit: This give no protection if clutch vacuum line is punctured but gives brake warning indicating in case it happens)
Now I get 10 applications instead of 2 when at idle
Just wanted to share my solution when getting weak vacuum recovery on multiple brake applications. Especially when upgraded to a dual diaphragm brake booster.
The solution is based on a standard vacuum pump and is using both vacuum chambers in the reservoir tank. It keeps the low vacuum pressure warning if installed.
Link the brake booster vacuum hose with a Y or a T connection to the clutch booster and get more recovery vacuum pressure.
(Edit: This give no protection if clutch vacuum line is punctured but gives brake warning indicating in case it happens)
Now I get 10 applications instead of 2 when at idle
Last edited: