i agree with the ease of checking the level on the vehicle. three bolts, especially with the 100's mounting setup is easy. however, my lx is on jackstands. my garage floor is level, but i pulled in on an angle so perhaps not entirely level and the wall is a few feet away. i'll take a level to my engine bay and see where things stand, so to speak. i'm waiting on parts to complete some mechanical stuff on my lx, so why not get the retrofit out of the way
two quick questions.
my 04 lx has resisters for daytime running lights. if i install a 9005 led bulbs in the high beam location, and the bulbs are not designed for low voltage input/daytime running lights, will i destroy the led bulb or will i simply loose the daytime running lights feature? i know there's a discussion on a mod for daytime running lights, but i don't want to get into this particular mod at this time - too many repairs on my plate at the moment.
can you repost the pic or thread address that shows how much of the lx shroud needs to be dremeled away for a d2s 5.0 projector using luke111's brackets? i didn't take a measurement of the i.d. of the shroud before beginning work, so "remove 3mm" won't help. what i.d. is required will suffice. or just a good straight on pic of a finished d2s retrofit behind the oem shrouds. i may have my shrouds modified correctly already- i'm uncertain if i need more clearance to allow for the full range of adjustment provided by the factory adjusters.
thanks!
two quick questions.
my 04 lx has resisters for daytime running lights. if i install a 9005 led bulbs in the high beam location, and the bulbs are not designed for low voltage input/daytime running lights, will i destroy the led bulb or will i simply loose the daytime running lights feature? i know there's a discussion on a mod for daytime running lights, but i don't want to get into this particular mod at this time - too many repairs on my plate at the moment.
can you repost the pic or thread address that shows how much of the lx shroud needs to be dremeled away for a d2s 5.0 projector using luke111's brackets? i didn't take a measurement of the i.d. of the shroud before beginning work, so "remove 3mm" won't help. what i.d. is required will suffice. or just a good straight on pic of a finished d2s retrofit behind the oem shrouds. i may have my shrouds modified correctly already- i'm uncertain if i need more clearance to allow for the full range of adjustment provided by the factory adjusters.
thanks!