I've double checked everything and believe it's all correct. When hooked up and and using the left side outer headlight for signal first it would blow the left headlight fuse. I changed the pin out in the signal plug and everything lights up but it's backwards. With the switch on low beams all 4 lights are one and when switched to highs only the 2 high beams(the inner lights) light up. My outer lights are Hella's with H4 60/65 watt bulbs, the inners are stock. I'm missing something here and my brain is starting to fry trying to solve it. For as much time as I put into this so far I regret not just buying a pre-made harness.
In my searching the forum I saw it mentioned a few times that there was something wrong with this diagram but never found a post that explained what it was. Does anyone know what that might be? Or have any insight on why my harness is not working? I suspect it's in the signal pickup and possibly also the pin out to the new H4's.
This is the diagram I followed from the Faq page https://www.ih8mud.com/tech/headlightharness/diagram.pdf
All 4 lights on with switch on low beams.
2 inner lights on and outers off with switch on high beams.
In my searching the forum I saw it mentioned a few times that there was something wrong with this diagram but never found a post that explained what it was. Does anyone know what that might be? Or have any insight on why my harness is not working? I suspect it's in the signal pickup and possibly also the pin out to the new H4's.
This is the diagram I followed from the Faq page https://www.ih8mud.com/tech/headlightharness/diagram.pdf
All 4 lights on with switch on low beams.
2 inner lights on and outers off with switch on high beams.