I finally got around to installing my PCK from eimkeith. It's pretty straightforward if you have a welder and can weld.
The first thing I did is weld up the corners.
Then I removed the Panhard bolt and tied the panhard up out of the way and checked the fit.
The fit was spot on. Then I hit all the areas to be welded with the flop desk to remove all the paint, I also beveled all areas to be welded both on the existing mount and the new piece to help facilitate a good weld.
Then I welded it up. Not the prettiest but I think it will hold.
The first thing I did is weld up the corners.
Then I removed the Panhard bolt and tied the panhard up out of the way and checked the fit.
The fit was spot on. Then I hit all the areas to be welded with the flop desk to remove all the paint, I also beveled all areas to be welded both on the existing mount and the new piece to help facilitate a good weld.
Then I welded it up. Not the prettiest but I think it will hold.