I found a good replacement heater hose for the external heater—the ones under the truck
gates # 18452
gates # 18452
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Good catch—it’s 18453FYI...post says 18452, photo shows 18453.
The wire style hose clamp was a bit too large for the hose—so I put some friction tape on there so it would clamp A little tighterOohhh, good share. Thanks.
What is that material sleeve under the hose clamp?
Here’s a couple more that work—you have to trim to fit , but they are damn close
Heater valve to engine: gates: 19038
Heater valve to heater core: gates : 18079
Cross pipe to engine: gates : 18700
View attachment 2248200View attachment 2248201
I took the old ones down to o Reilly and just matched them up on the wall in the back room—-just found ones that were close—hope this will save some guys some timeNice work, thanks.
How did you find these?...cross ref. on the web, or digging through an auto parts store inventory?
Any chance you saw something that can be used in place of the FJ60 rear heater bypass hose? That is the unicorn!I took the old ones down to o Reilly and just matched them up on the wall in the back room—-just found ones that were close—hope this will save some guys some time