Highly recommended trail tailor extended front sway bar lengths. Wow - what a difference. 2.5 inch heavy lift. Under 30 minute install. All bolts were cooperating.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Highly recommended trail tailor extended front sway bar lengths. Wow - what a difference. 2.5 inch heavy lift. Under 30 minute install. All bolts were cooperating.
View attachment 2123296
I had the rear. The front make such a difference.I have them front and rear. You can totally tell the difference.
More info/link on the AHC "quick mod"?Did the quick mod for the AHC. She now sits at this for mode N. 1.5” higher if in H mode.
Dissent bumper being Powdercoated atm and the Wildpeaks will be on in a month.
More info/link on the AHC "quick mod"?
An ARB bumper and those tube things will not help you if you are getting damage like that. ARB bumpers will and do flex quite a bit and be pushed into your fenders and I do not believe those tubes are for much more than brush deterrents.
Aloha! Perfect vehicle to cruise 808! My sister in law told me it would cost her around $1200 to ship her QX56 to Oahu if she was to bring it there, that rate was last year..After lurking on here for years and searching for an LC, flew to Seattle and bought this super clean 04. Previous owner took good care of it and had the maintenance records to back it up. 255k miles but drives like a dream. I blame my Dad for fueling my desire for Land Cruisers. He's got a triple locked 80 series. Now all I gotta do is ship her back home to Hawaii.View attachment 2124154View attachment 2124155
It's $1500 as of today. Matson is raping usAloha! Perfect vehicle to cruise 808! My sister in law told me it would cost her around $1200 to ship her QX56 to Oahu if she was to bring it there, that rate was last year..
Doesn’t seem sooo bad for an ocean trip-about the same as having one shipped to the east coast from SF last year when I bought mine....It's $1500 as of today. Matson is raping us
I see you are using two sets of Rhino Ramps to work on your truck. I do this too but have read you are not supposed to. Rather, you are only supposed to use one set on one end of the vehicle at a time.Added front and rear mud flaps. Those with Slee rear bumpers, you can cut and punch holes into the mud flaps, and use the existing rear bumper bolts for a temporary fix. I like the old defender rear mud flap look, so that was what I was going for here - of course, they are also functional. I'm going to a fabricator next week to think of a bracket system for the front and rear. I'd like the bracket to be a robust one-and-done item, with the ability to easily replace the mud flaps as needed from rock crawling/abuse. The mud flaps I purchased are super cheap, and have no problem replacing those as needed.
And lastly, I finally got around to installing the dual (four total upfront) USB ports on the international Land Cruiser piece (instead of the cigarette lighter and tray one). I linked the left USB port to the main battery, and the right USB port to the Aux. battery, because they also show voltage -- just another redundancy to show how the batteries are holding up/charging. Eventually there will be a rocker panel in between the USB ports for lockers, lights, etc.
View attachment 2124141View attachment 2124143View attachment 2124144View attachment 2124145View attachment 2124146
Driver side already busted so ordered replacement bulbs. The old head in me went for amber color rather white, now LEDs, better visibility. If you’re an 80s / 90s kid, you’d understand.
View attachment 2124130
I am considering these with my OME heavy lift. The front end of my 100 feels very tight and jarring over bumps.I had the rear. The front make such a difference.