There are a lot of threads and versions of the 80 series skid plate. While there are a bunch of great HD options out there, I just couldn't get on board with any of the solutions, DIY or turn key vendor options. here is my plan, thought I share and get some input.
criteria:
- not 3/8". Its tough, heavy, and strong but seems like not enough of an engineered solution to me. I mean 1/2 inch would be stiffer and stronger. hell why not 1"..... why is 3/8 the right solution for 2 dimensional bends. some angles and bends can make it stout and stronger at the same time with less weight with better function.
- angles: skids need to be able to slip up on to the flats. Sharp edges on the lowest contacting surfaces aren't the best in my experiences.
- debating doing some FEA and possible doing 3/16 but for now 1/4 will be good for a quick and dirty.
criteria:
- not 3/8". Its tough, heavy, and strong but seems like not enough of an engineered solution to me. I mean 1/2 inch would be stiffer and stronger. hell why not 1"..... why is 3/8 the right solution for 2 dimensional bends. some angles and bends can make it stout and stronger at the same time with less weight with better function.
- angles: skids need to be able to slip up on to the flats. Sharp edges on the lowest contacting surfaces aren't the best in my experiences.
- debating doing some FEA and possible doing 3/16 but for now 1/4 will be good for a quick and dirty.