SOLD
For Sale or Trade. 1976 FJ40 – less than 300 miles since body off restoration (build thread link in my sig line). This is by far the coolest vehicle I’ve owned or had the privilege to work on, but with 3 kids, it’s time to move up to something bigger. All engine, tranny and t-case seals and gaskets replaced with the exception of valve stem seals and VC gasket. It doesn’t burn oil, so I was waiting to replace those during the next valve adjustment. New water pump, t-stat and hoses. No rust. Brand new wheels/MT tires (30x9.5 R15). New TRE’s. Carb just rebuilt by Mark. MAF HEI distributor. New GR starter. Warn front bumper with Warn 8274, remote, Amsteel 3/8”x85ft synthetic line and hook (by Southeast Overland). New 48” Hi-Lift jack...
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
.
Filters
One of them is taken completely apart in order to perform a frame-off restoration. This vehicle comes with the original motor, transmission, and PTO winch.
The second one currently has the fenders, running boards, and bumpers taken off where I was going to do some minor restorations to it and ran into financial problems. This vehicle has a 350 conversion (no leaks or smoke, runs perfect), spring over axle, 4" leafspring lift, rear locker, and Saginaw power steering with high steer conversion. It has also had a disk brake conversion on the front. It will need a new set of tires soon, as seen in the photo. All this one needs to be legal is to have the turn signals put back on.
Extra parts list: (not counting what has already been...
I've got a 1970 FJ40 that we have decided to sell.
We've owned it for almost 2 years, and it runs very well. The body is original, so it could use some help.
Check out my pictures, and let me know if you have any questions.
Sam- three three oh, 414-025 nine.
$4500
I've got lots more pictures if you would like to see them.
FJ40 wanted , Tennessee
Looking for a nice FJ40, prefer '77 and up but will consider others. No projects or rust buckets please. Located in Southern Middle Tennessee. Just joined today, thanks for letting me post.
Max
1978 Toyota FJ-40 Landcruiser. Excellent original condition with a few upgrades. California born and raised then moved to Reno,Nevada. The Odometer shows 35k miles but I’m guessing it’s 135k. It has spent the better part of the last 20 years sitting in garages.
The Good:
It’s all original except where noted.
Original mustard yellow paint.
A lot of mechanical work has been done the last four years and since then it has been garaged and driven only occasionally.
Rebuilt carb and complete tune-up. Most of the Cal emissions equipment operational, passed NV smog last year. Previous owner installed a Downey header and removed the carb heat system.
Rebuilt radiator.
Complete steering rebuild: New tie rod ends, drag link end, centering...
1972 FJ40 Trail Rig
Located in Gig Harbor, WA $8000
1972 FJ40 Toyota Landcruiser. Original inline 6 "F" Motor, mated to an SM420 4spd tranny (granny 1st gear) with advance adapter. Aussie lockers front and rear, 36x12.50r15 TSL super swamper bias plys, Procomp wheels w/ weld on beadlocks, rampage seats, RCI 5 point harnesses, RCI 15gallon aluminum fuel cell, Custom bent MetalTech 6 point cage to fit dovetailed body. Rear of body narrowed around 18", body narrowed 5" at rear portion of doors, GM tilt column, GM saginaw box/pump, Trail Gear High Steer, Jeep TJ rear fender flares, Longfield 30 splined inners/outers with chromo hub gears (lifetime warranty), rock sliders, 1/4" thick belly pan (can hold entire weight of vehicle on a...
Selling by beloved 78’ FJ40. I had all intentions of keeping the vehicle forever, but I just don’t have the time to appreciate it for what it is. I bought it approximately 4 years ago from the second owner in Portland with 150k +/- on the clock. It spent much of its life traveling in E Oregon and Idaho on the highways throughout the 80’s and it is now just sitting in my shop in Sisters Oregon (just outside of Bend). It is in excellent shape for the year. The rig is as 99.99% rust free and pristine as they come. All original throughout, down to the paint. The vehicle retains ALL the stock smog equipment and runs excellent. The specifics of the vehicle:
Drivetrain:
-All stock.
-Warn hubs, 4x4 works great, shifts like a dream.
-Less than...
Found this on Craigslist, my :princess: would kill me if I took home a parts truck but thought someone on here might appreciate it
70 toyota fj40 (parts)
My brother finally got the urge to pick up another 40. He is located in Oregon and looking for one around the 6k range. He'd prefer one with a SBC and auto trans.
If anyone knows of any decent ones please let me know.
Jake
Selling 1969 FJ40 hardtop with plow--$5000. Strong engine (chevy straight 6) with approximately 75,000 miles. Needs front end work due to damage to passenger ball joint from plowing. Only used intermittently for snowplowing in mountains of Montana. Had hoped to restore it, but my kids taking too much of my time. Would need to trailer it as I've got the front axle out of it.
I was contacted by a friend of a friend today about this truck. Their initial thought was that I would by it, but it isn't in the cards right now as my wife and I closed on a house Thursday. Anyway, I'll list what I know and you can contact the owner for more info:
1975 FJ40
Original drivetrain, engine rebuild 46K ago, needs headgasket currently (will not run currently)
Driven up from Guatemala and parked in GA
4-speed
Front seats out of a Porsche
Rear seat (bench I presume) out of a Bronco
Auxilary fuel tank mounted in rear
Only rust issue (per the owner) is at the raingutters on the top
Price: $5500, negotiable
Owner: Jim McConnell 678-446-0157
Located in Buford, GA
Here are a couple of pics. I might go look at it tomorrow...
Less than 1000 miles since complete. Over $90,000.00 invested-have receipts and pictures of entire proces.
Pics Here: 1-Landcruiser pictures by Clinton1009 - Photobucket
Asking $48,500.00
List of most mods:
Land Cruiser Restoration Mods:
New back half of tub:
Nerf bars and front bumber custom from Up and Over:
Frame Repairs and wax, Up and Over:
Motor-427 Small block, Bill Mitchell 550H.P.:
Headers- Advance adapters, for now, custom ones are $2,000.00
Drive Shaft- Tom Wood’s:
Radiator- Griffin:
Serpentine belt conversion, flywheel:
Rear Axle- Tera flex crd-60 w/456 gears Arb Locker and Disk Brakes all around:
Long range fuel tank, Man-A-Fre:
Chrome Hinges:
Transmission-NV4500 and transfer case-twin Stick...
This is a nearly complete project rig designed to be a sand and rock toy. It still needs things like the alternator, power steering pump, and the brackets and pulleys. There is no battery or wiring harness in the engine bay. Stock drive shafts are included, but they don't look like they have been modified to fit yet. The original owner/builder passed away a couple of years ago, and I am trying to help the family out. There are no receipts or documents to verify details, so the parts descriptions are just general observations that I made while looking the rig over a few days ago. It is parked in a work shop just north of Phoenix, so it is in a dry, clean climate.
The body is in very good shape. It has a little surface rust...
At a Chevy dealer in Norman, OK. I'm not sure it's worth $49K but it sure is nice to look at.
Oklahoma City Chevrolet Dealer, Marc Heitz Chevrolet in Norman, OK: New Chevrolet & Used Car Dealership, Auto Repair & Service
1970 FJ40, Chevy 350, SM465, NP205, 14 bolt full float rear with Detroit Locker, stock front, high steer, Steering dampers, NEW 38.5 boggers on New black steel rims, Line X'd interior after sand blasting, Ramsey Winch, power steering and brakes (drum).
Truck is very solid and awesome in the mud/trails. Not built for crawling or the road (Too tall, too heavy, too old). Looks good from a far. Even better covered in Mud. Love to see it go to a good home where someone wheels it often.
Call Chris @ 954- four four four - 3 4 nine four
Hate to let it go but I need to change it up a bit.
66' Cruiser semi restored.
70' F155 engine,
SM420 tranny
Dana300 twin sticked
centered Toy truck rear.
Front axle out of a 76' with fine spline birfields, toy truck stuff from knuckles out.
Disk brakes all around, corvette master cylinder.
Warn M8000. Custom cage, long jump seats. As you can see in the buildup I have went through everything. poly tank, heater works, all gauges, switches rubber seals, emblems are there and in great shape. Complete truck. No parts needed. just some love. I measured prior to cage build and a besttop or Paki top will still go on with the cage in place. No top now though. Tonneau cover only.
link to buildup on here...
This has been a labor of love for many years. This is a very nice FJ-40 with a bikini top, the hard top and sides with rear ambulance door, metal doors AND canvas doors, and the original canvas top rails. Everything was repainted so all pieces match. The original 2F engine runs great and the truck's odometer is now showing 800 miles. The service records are inconsistent re mileage - some of the records would suggest the truck now has over 100,000 miles and other records suggest that we're at 200,800.
There are two jump seats although only one is installed at this time. I have the side mirrors but they are not installed. It's ready to enjoy now or add your own finishing touches to this FJ 40. Power steering was...
After much hand wringing, it has come the time. I've got my house for sale now and my new home won't have garage space. Unfortunately for me, my poor 40 has been sitting only being taken out a couple times a year at best, and the costs of supporting two wheeling trucks is a bit overwhelming at this point, so sadly, the less family friendly truck has to go. Hardly have much time for it lately to work on the little things, but as it stands, it's ready to go at the turn of a key and wheel. It's driveable to the trails as it stands, but with airshocks when they've been sitting a bit, they need to cycle to stiffen up, so the ride is very soft when it hasnt been driven in a few months. Wheels like mad. Insured with regular insurance, no...
Here is the 84
https://forum.ih8mud.com/40-55-series-tech/583538-my-fj40.html
I'm listing this for my good buddy Darren who is a mud member. He bought this truck about a year ago. We drove down and picked it up. Its a real nice solid truck that has had any problems or issues addressed, and repaired correctly. Please direct all questions to drobinson592@yahoo.com as I will not be monitoring this thread much. You could even call/text him at 540-537-5926
Here is the initial for sale thread from the last owner:
https://forum.ih8mud.com/vehicles-trailers-sale-wanted/456029-sale-sturdy-79-fj40-dd-sale-again.html
Since purchasing is 13 months ago, the following repairs have been made:
New Webber Carburetor and FJ Gas pedal conversion
All new fluids
New 6 into 1 header and all new exhaust
New fog lights
New front...
Need 79-on donor 12volt FJ40 for electrical chassis/parts for my money pit dream Landcruiser.
The LONG VERSION:
After enjoying the heck out of my 78 FJ40, I decided to pass on the good times and do my part to restore another TLC. I hated gassing up every 2-3 days with my old 2F. So I was dead set on a BJ. I bought and imported an unmolested but well aged/rusted 82 BJ42 from vancouver to florida 2 years ago. Importing and shipping costed over $3K- the first of many pains in my head and wallet. I happily drove the "Red Dragon" whenever I could while I saved up for the restore.
I want to drive and enjoy this BJ42 when done, so my plan is to do the frame off and modify it with PS, AC. But it is 24volt-I can't even charge my...
1972 Toyota land cruiser with 38 inch super swamper tires like new and a set of 35 inch BFG, chevy V8, 700r4 trans, New holley truck avenger carb, 9500LB winch, custom front and rear bumpers, new windshield, complete hard top, new exhaust,custom made running boards, rebuilt front end with new disk breakes, removable doors, needs prepped and painted. 8000.00 OBO Call 318-974-one-nine-seven-nine Lot of time and money invested. some extra parts to go also in Oak Grove LA
TOYOTA LANDCRUISER 1979 FJ-40 RARE CLASSIC
Not mine
Says $9300 on the ad but $8800 before you click on it. Guess the price has been reduced. I wonder if he has the receipts for the rebuild.
