A journey with my boys- The Elf Barn as I call it.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

That's a very well thought out design; and obviously well executed. Those should be some very happy chickens. So how many chickens are you planning on raising?

We originally raised a pair of geese 3 years ago and we did eat some of the eggs the first year. The goose unfortunately got killed; we assume by coyote(s) in the creek as we never found a kill site or a carcass for that matter. Fast forward two years and we decided to raise a pair of geese for our widowed gander. That has worked out very well so far. He is a changed man with his new harem, much more chill. Trust me, the last thing you need around the farm is a grumpy gander. Not sure what we will do with all the eggs next year. They taste fine but they are different than chicken eggs and obviously much, much larger. We also have chickens so we really don't need the goose eggs. Maybe we will just let them hatch and see what happens?

I can patch sheetrock with excellent results, and I can hang sheetrock with the best of them; just don't ask me to block in a whole room. My one or two attempts at that were unmitigated disasters. I haven't really tried to find a brick mason yet other than getting a list from the local brick retailer. Pretty sure it will be difficult for such a small job but maybe I will get lucky. Either that or I will have to learn. Never really tried it but, like many skills, it looks really easy when you watch a good mason at work.

Those chisels are something else. After carving in 54 large mortises they are still very sharp. I really don't understand how they can stay sharp through all that carving. Not sure what I will do with them now that I'm done with this timber frame but I sure couldn't have done it without them.
 
That's a very well thought out design; and obviously well executed. Those should be some very happy chickens. So how many chickens are you planning on raising?

We originally raised a pair of geese 3 years ago and we did eat some of the eggs the first year. The goose unfortunately got killed; we assume by coyote(s) in the creek as we never found a kill site or a carcass for that matter. Fast forward two years and we decided to raise a pair of geese for our widowed gander. That has worked out very well so far. He is a changed man with his new harem, much more chill. Trust me, the last thing you need around the farm is a grumpy gander. Not sure what we will do with all the eggs next year. They taste fine but they are different than chicken eggs and obviously much, much larger. We also have chickens so we really don't need the goose eggs. Maybe we will just let them hatch and see what happens?

I can patch sheetrock with excellent results, and I can hang sheetrock with the best of them; just don't ask me to block in a whole room. My one or two attempts at that were unmitigated disasters. I haven't really tried to find a brick mason yet other than getting a list from the local brick retailer. Pretty sure it will be difficult for such a small job but maybe I will get lucky. Either that or I will have to learn. Never really tried it but, like many skills, it looks really easy when you watch a good mason at work.

Those chisels are something else. After carving in 54 large mortises they are still very sharp. I really don't understand how they can stay sharp through all that carving. Not sure what I will do with them now that I'm done with this timber frame but I sure couldn't have done it without them.
We are planning about 20 max. Gradually. Really enjoy learning about the approach the Amish take on raising chickens. It’s very sustainable and wholesome. Grain free. These velociraptors are omnivores. Do it right and you get nutrient dense eggs.

BTW, I am a big Larry Haun fan. Learning a lot from him.
 
Last edited:
That's a very well thought out design; and obviously well executed. Those should be some very happy chickens. So how many chickens are you planning on raising?

We originally raised a pair of geese 3 years ago and we did eat some of the eggs the first year. The goose unfortunately got killed; we assume by coyote(s) in the creek as we never found a kill site or a carcass for that matter. Fast forward two years and we decided to raise a pair of geese for our widowed gander. That has worked out very well so far. He is a changed man with his new harem, much more chill. Trust me, the last thing you need around the farm is a grumpy gander. Not sure what we will do with all the eggs next year. They taste fine but they are different than chicken eggs and obviously much, much larger. We also have chickens so we really don't need the goose eggs. Maybe we will just let them hatch and see what happens?

I can patch sheetrock with excellent results, and I can hang sheetrock with the best of them; just don't ask me to block in a whole room. My one or two attempts at that were unmitigated disasters. I haven't really tried to find a brick mason yet other than getting a list from the local brick retailer. Pretty sure it will be difficult for such a small job but maybe I will get lucky. Either that or I will have to learn. Never really tried it but, like many skills, it looks really easy when you watch a good mason at work.

Those chisels are something else. After carving in 54 large mortises they are still very sharp. I really don't understand how they can stay sharp through all that carving. Not sure what I will do with them now that I'm done with this timber frame but I sure couldn't have done it without them.
You can make a coop with them chisels.😁.
 
Greg, you might try the approach I took when I needed a stone mason. I was driving by a local commercial job site where they were laying brick and stopped to inquire about their interest in my small job. The rest is history.
 
Bought this to try out from Scamazon. I am in need of a fluid transfer/extractor for the big rigs/skid steer/excavators. Also absolutely hate trying to fill gear into diffs, transmissions, and transfer cases. 12v. Can hook it up to a Noico jump start pack and has an on/off right at the pump. Came with case and tubing bag. Will share how it works. I like to buy gear oil in bulk because it is cheaper than the 1L bottles or squeeze packs. Their is a hand pump for the 5gal bucket, but it is hard to pump when you are under a truck.

IMG_0617.webp
 
Last edited:
Bought this to try out from Scamazon. I am in need of a fluid transfer/extractor for the big rigs/skid steer/excavators. Also absolutely hate trying to fill gear into diffs, transmissions, and transfer cases. 12v. Can hook it up to a Noico jump start pack and has an on/off right at the pump. Came with case and tubing bag. Will share how it works. I like it o buy gear oil in bulk because it is cheaper than the 1L bottles or squeeze packs. Their is a hand pump for the 5gal bucket, but it is hard to pump when you are under a truck.

View attachment 4173216
:popcorn:

Let us know how it goes.
 
I have been baselining my 40 to drive it up to SAS. Some of the brake and clutch tube nuts have surface rust and crud that seizes them. Where accessible and away from soft lines and wires, I have been able to free them by getting a MAP torch on it and hitting it with PB blaster. I just upgraded my clutch slave and master and was trying to loosen the last tube nut on the PS firewall that is siezed, but my MAP torch flame was too big and bottle did not allow me to get to it. Got this to try out. I have an acetylene set up for which I could have bought a mini torch for small precise heating but it was $$$$. This allows me to have the same surgical flame but with MAP gas for very cheap. It also has a hose to give more access to hard reach places with the torch remote from the bottle. I could have bought a cigar lighter like torch but refills are a pain. It comes with a neat base to seat the torch and MAP bottle.

IMG_0643.webp


IMG_0644.webp
 
Nice, probably have to get one. Got me curious to find out how much hotter MAP gas was than propane. Didn't know original MAPP was discontinued in 2008 and what they sell now isn't much hotter than propane - 3730F vs 3600. Original MAPP gas was 5300F.
 
Nice, probably have to get one. Got me curious to find out how much hotter MAP gas was than propane. Didn't know original MAPP was discontinued in 2008 and what they sell now isn't much hotter than propane - 3730F vs 3600. Original MAPP gas was 5300F.
So I have both blue and yellow bottles. The yellow bottle is much hotter.
 
I would have agreed with you hadn't I gotten interested in your torch and then got curious about the actual MAPP gas temp vs propane. I was surprised the MAPP gas I always knew has been discontinued and replaced with MAP-Pro. Both are yellow, but only MAP-Pro is sold today and it's only 130F hotter than propane. Went out to the shop thinking I still had a couple bottles of the original MAPP but only one original and one of the new stuff. Can't see any reason to buy the current MAP-Pro vs propane given the small temp difference and big price difference.
 
I would have agreed with you hadn't I gotten interested in your torch and then got curious about the actual MAPP gas temp vs propane. I was surprised the MAPP gas I always knew has been discontinued and replaced with MAP-Pro. Both are yellow, but only MAP-Pro is sold today and it's only 130F hotter than propane. Went out to the shop thinking I still had a couple bottles of the original MAPP but only one original and one of the new stuff. Can't see any reason to buy the current MAP-Pro vs propane given the small temp difference and big price difference.
Good to know! I earned my pillow. Learned something new!😁
 
I have been baselining my 40 to drive it up to SAS. Some of the brake and clutch tube nuts have surface rust and crud that seizes them. Where accessible and away from soft lines and wires, I have been able to free them by getting a MAP torch on it and hitting it with PB blaster. I just upgraded my clutch slave and master and was trying to loosen the last tube nut on the PS firewall that is siezed, but my MAP torch flame was too big and bottle did not allow me to get to it. Got this to try out. I have an acetylene set up for which I could have bought a mini torch for small precise heating but it was $$$$. This allows me to have the same surgical flame but with MAP gas for very cheap. It also has a hose to give more access to hard reach places with the torch remote from the bottle. I could have bought a cigar lighter like torch but refills are a pain. It comes with a neat base to seat the torch and MAP bottle.

View attachment 4174444

View attachment 4174445
I see many crème brûlées in your future.
 
Works like a charm. Can dial in flame size very well. Was able to loosen hard to reach tube nut!!!
 
Well I clicked on the link since it read Elf Barn and I'm glad I did! Just ordered the Fire Point as I will have brakes in the future to work on. Thank you!
 
I would have agreed with you hadn't I gotten interested in your torch and then got curious about the actual MAPP gas temp vs propane. I was surprised the MAPP gas I always knew has been discontinued and replaced with MAP-Pro. Both are yellow, but only MAP-Pro is sold today and it's only 130F hotter than propane. Went out to the shop thinking I still had a couple bottles of the original MAPP but only one original and one of the new stuff. Can't see any reason to buy the current MAP-Pro vs propane given the small temp difference and big price difference.
I didn’t know it was such a small difference now. Sure seems a lot more noticeable than only 130°
 
Bought this to try out from Scamazon. I am in need of a fluid transfer/extractor for the big rigs/skid steer/excavators. Also absolutely hate trying to fill gear into diffs, transmissions, and transfer cases. 12v. Can hook it up to a Noico jump start pack and has an on/off right at the pump. Came with case and tubing bag. Will share how it works. I like to buy gear oil in bulk because it is cheaper than the 1L bottles or squeeze packs. Their is a hand pump for the 5gal bucket, but it is hard to pump when you are under a truck.

View attachment 4173216
So this is a dud. Does not move any fluid, let alone gear oil. Returning it.
 
So this is a dud. Does not move any fluid, let alone gear oil. Returning it.
I made a gear oil pump out of a 2-gallon garden sprayer and some extra tubing. Works a treat. Let me see if I can find the posts...
 
Back
Top Bottom