Wiper Motor wiring (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 20, 2003
Threads
32
Messages
339
Location
Watertown, NY
Website
www.tonkacruiser.com
Could someone with a wiper motor above the windshield check the wires going to the motor. Please let me know what is ground, what is constant hot and what is high and low. Any help is appriciated.

Thanks, Chris
http://members.rogers.com/tonkac/
 
I think that this is to the early 40s.
Blue is your 12V positive and goes to the wiper fuse.
Blue/Red originates at the switch and goes to the HIGH SPEED winding on the motor.
Blue/Black originates at the switch and goes to the LOW SPEED winding on the motor.
Blue/White originates at the switch and goes to the LOW SPEED winding on the motor.
Hope that helps. If not then look in the tech section.
 
Light blue from the fuse to the motor, washer pump and to the switch.
L/Yellow stripe from the switch to the washer motor
L/White, L/R and L/B from the motor to the switch.

Grounded through the motor. Be sure your hinges are allowing ground through to the tub.
 

Users who are viewing this thread

Back
Top Bottom