When replacing transfer to trans seal...

[SteveO]

Can someone do a poor noob a favor and pull up a drawing that shows where this tranny-transfercase seal is with the spring. Parts guy insists I have it but there's no spring or lip or anything. My best guess is you're talking about #27 on this drawing. http://www.sor.com/sor/cat068.tam?xax=19885 Can someone please confirm? I want to try and replace it on the weekend but still need to order it. Thanks. ....Steve

 

[Poser]

Yes, that is the seal, and it is installed with the face of the seal into the case/spring towards the tranny....

Not at the shop, or I would give you the Toyota part number....the Toyota seal has a metal spring in it.

 

[Poser]

Look in the Toyota Chassis and Body FSM, you can see the seal orientation....

 

[SteveO]

Yes, that is the seal, and it is installed with the face of the seal into the case/spring towards the tranny....

Not at the shop, or I would give you the Toyota part number....the Toyota seal has a metal spring in it.

Thanks for the help, I knew I had the worng one. .....Steve

 

[SteveO]

Yes, that is the seal, and it is installed with the face of the seal into the case/spring towards the tranny....

Not at the shop, or I would give you the Toyota part number....the Toyota seal has a metal spring in it.

Any idea what the seal is actually called? Trying to order by phone. Thanks. .....Steve

 

[IDave]

Seal, Type T OIL
90311-42014

 

[SteveO]

Seal, Type T OIL
90311-42014

Perfect, thanks. ......Steve

 

[tmbrtmr]

transfer case puller

when i pulled the transfer case off my 40 is was a pita , went and got a proto puller number 4004 J worked great has feet on it with holes hooked to xfer case and pulled it right off

 

[El Cazador]

For pulling the xfer case apart from the trans this little homemade puller works like a charm. I had some 3" square tube lying around and used that to make it.

http://www.ih8mud.com/tech/tcremove1.php

Vic
Redlands, CA.

 

[fcgadget]

Just hang the brake from the frame on a zip tie