A few more pics
What have you done to your 200 Series this week? (29 Viewers)
- Thread starter MScruiser
- Start date
-
- Tags
- 200 series
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Soaked up some washboards to cut a Christmas tree.
Dual light button installed. For now I have only roof led bar but ARB Solis is plan for future. I tried to find green light button but there is no option. When light is ON color go white. When is OFF light is redish/orange
Julian73
SILVER Star
Here's a Blue Off, Green On option
LX570: added cheapo rear area lighting.
Started with round battery operated harbor freight LED lights.
Cut out three 2" diameter wood pucks out of 3/4" plywood. Glued them together. then stuck the light puck on top of them:
and it fits into the cup holders for the 3rd row seats (which i do not have the seats installed)
Started with round battery operated harbor freight LED lights.
Cut out three 2" diameter wood pucks out of 3/4" plywood. Glued them together. then stuck the light puck on top of them:
and it fits into the cup holders for the 3rd row seats (which i do not have the seats installed)
Last edited:
My early christmas present
Got my plates for my camper box today. Tomorrow will the first day of building.
12mm for the box and 9mm for the other stuff.
12mm for the box and 9mm for the other stuff.
From all black to white. Will see the result. I am thinking to reveal the chrome under the wrap. First I did blackout but did not like at the end.
Plunked my credit card down at my local indy shop to replace both valve cover gaskets, plugs and coolant flush.
Was happy to hear that there wasn’t any oil around the plugs
Was happy to hear that there wasn’t any oil around the plugs
. Added a Roam 160 case to the back. Fits perfectly and fills the space really well between the seats.
̶d̶̶a̶̶y̶̶ ̶̶2̶ Day 1
Today I assembled the outer housings and tomorrow I will work on the subdivisions, drawers and the areas I have to mill out. I used selfdrilling screws with 3,5mm and made holes for them with 2,5mm so the wood don’t crack.
Did I set a record for only lasting 4 days with the stock cupholders??? Easily the thing I miss most from my 06 Sequoia — pretty sure it had like 10 or 12.
kcjaz
SILVER Star
Forget your storage box, I gotta see more pics of your garage that appears to have two sail boats in it!
Haha that was our first mod also, but I don't think we had the new ones in at day 4. Impressive.
Hahaha I wish it was my garage…
It belongs to a friend who is a master boat builder and who owns a marina. Boats (10-12 inside and around 15 outside) are stored and refurbished there over the winter but I can come and go as I please. It is dry, it is warm and I have a lot of space.
In addition, he has a good coffee maker
Day 3
Housings are done, the drawer fits and the first box is finished.
this is the groundplate of the drawer.
Housings are done, the drawer fits and the first box is finished.
this is the groundplate of the drawer.
The five visible Festool systainers tell me this isn't your first project with wood!
I didn't do anything yet, but daddy got an early Xmas gift today.
LCT
SILVER Star
That shade of green looks different than their neon green color. Did you have it powder coated?
