What have you done to your 100 Series this week? (38 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Oh i like that what lights did you use?
I haven't actually done it yet. Should be a fun challenge 
I haven't actually done it yet. Should be a fun challenge
View attachment 3610897
View attachment 3610900
View attachment 3610901
Rip the bumpers and fenders off. Pssh, easy.
That's awesome! Definitely on my to-do list.
You can choose the hose alone, or all of the components and clips…
After 2 refunds from 2 companies, I guess I’m swapping one UCA with a 555 and rebuilding the other. Thought I was going to score big time on 555 arms at $75 each, with buyer protection for money back guaranteed, why not roll the dice? I got one in super fast, but the other never showed. Got a refund about 10 days later and grabbed the left side again from another retailer, only to be refunded within 4 hours citing “the last one in stock is damaged and we cannot fulfill shipment with damaged goods.” Such is life on eBay I suppose.
Yesterday I ordered the last package from the guys at Cruiserteq and then onto beginning 300k front refresh!
1 rebuilt UCA
1 new UCA
New outer TREs
Koyo wheel bearings
555 LBJs
New LCA bushings
Random hub bits
Yesterday I ordered the last package from the guys at Cruiserteq and then onto beginning 300k front refresh!
1 rebuilt UCA
1 new UCA
New outer TREs
Koyo wheel bearings
555 LBJs
New LCA bushings
Random hub bits
Finally got the right pigtail today and installed it. Still need to get some wire loom but my truck is back to operational.
Officially became a hundy owner Tuesday. Picked up the LX in Denver and within 15 hours had driven it 1000 miles straight to a buddies place in SoCal.
Fantastic highway cruiser, and for all the gloom and doom everyone here has on the fuel economy, I averaged 17.6 at an average speed of 76. Of course when I get back home the stock size highway tires will be the first to go...
Only thing I noticed looking it over that I didn't like were some tell-tale red crusties on one of the heater T's. Thankfully I came prepared with new aluminum ones. (RockAuto has the Autotecnica ones for $10 each btw) Good thing I did because one of the factory ones wasn't long for this world. Huge stack of maintenance history but nothing on the T's so I'm sure they were original.
Girlfriend is flying in Sunday and we'll start a nice road trip back to the East Coast. Nothing exciting planned for this once I get home, a good baseline, toss the running boards, 275/70/18's, get the AHC pressures dialed in (although it rides extremely nice as is) and maybe a tiny sensor lift. It rides and drives too nice to want to do anything more.
Fantastic highway cruiser, and for all the gloom and doom everyone here has on the fuel economy, I averaged 17.6 at an average speed of 76. Of course when I get back home the stock size highway tires will be the first to go...
Only thing I noticed looking it over that I didn't like were some tell-tale red crusties on one of the heater T's. Thankfully I came prepared with new aluminum ones. (RockAuto has the Autotecnica ones for $10 each btw) Good thing I did because one of the factory ones wasn't long for this world. Huge stack of maintenance history but nothing on the T's so I'm sure they were original.
Girlfriend is flying in Sunday and we'll start a nice road trip back to the East Coast. Nothing exciting planned for this once I get home, a good baseline, toss the running boards, 275/70/18's, get the AHC pressures dialed in (although it rides extremely nice as is) and maybe a tiny sensor lift. It rides and drives too nice to want to do anything more.
Got a bit carried away while adding "a few" tie down points to my drawers. I ended up also replacing the piano hinges I had used for euro cabinet hinges and sprayed the top with 2K Raptor Liner. Just finished putting this all back together today and I'm pretty happy with how it all turned out.
Next is to finally get around to finishing the drawer faces and replacing a bunch of rusty bolts.
Huge improvement from this:
Next is to finally get around to finishing the drawer faces and replacing a bunch of rusty bolts.
Huge improvement from this:
Before or after fitting the tyres?
Its been a sad long 3 months for me.
My old girl was coming up to the 400,000 big service. Had it all booked in on the Tues for new timing belt and water pump replacement. $2.5k that I didn't really have, but neither did I have the time or space to do these things myself.
On the Saturday before driving down the highway and hear a funny clunk, things dont feel right, engine start doing some funky stuff. Switch it off LPG onto petrol, settles down for a couple of minutes, while I manage to find somewhere to pull over. Open up the bonnet and its like in the movies with steam pissing out.
Get it towed to the nearest 4x4 mechanic. Lots of Patrols parked out front should have been thr first warning. Compression looks okay, starts up, he is thinking it might not be too bad. Does the major service, replaces the radiator, replaces the water pump that was cactus (the cause of it all), puts it all back together, charges me $4k, and there is still coolant blowing out the exhaust. Quotes me $15k for an engine swap.
After the defibrillator manages to restart my heart, I say no thanks. Tow it across Melbourne to my go to mechanic. His opinion is that its easiser to do a engine swap than a rebuild, so thr last guy just wanted to make easy coin. My guy strips the engine, heads were banana-ed but could be remachined, new valves, springs, shimmed for LPG on the exhaust, new coils and spark plugs. Basically a full engine block up rebuild. Still cost me $7.5k, but she should be good for the next 20yrs I think.
Got her back last weekend, and put on 1000km in the first few days. Its so nice to have it back and I'm glad I spent thr $11k rather than spend $11k on a boring souless ute.
And I swear its got at least 10 more horsepower... Ive gotta believe that!
My old girl was coming up to the 400,000 big service. Had it all booked in on the Tues for new timing belt and water pump replacement. $2.5k that I didn't really have, but neither did I have the time or space to do these things myself.
On the Saturday before driving down the highway and hear a funny clunk, things dont feel right, engine start doing some funky stuff. Switch it off LPG onto petrol, settles down for a couple of minutes, while I manage to find somewhere to pull over. Open up the bonnet and its like in the movies with steam pissing out.
Get it towed to the nearest 4x4 mechanic. Lots of Patrols parked out front should have been thr first warning. Compression looks okay, starts up, he is thinking it might not be too bad. Does the major service, replaces the radiator, replaces the water pump that was cactus (the cause of it all), puts it all back together, charges me $4k, and there is still coolant blowing out the exhaust. Quotes me $15k for an engine swap.
After the defibrillator manages to restart my heart, I say no thanks. Tow it across Melbourne to my go to mechanic. His opinion is that its easiser to do a engine swap than a rebuild, so thr last guy just wanted to make easy coin. My guy strips the engine, heads were banana-ed but could be remachined, new valves, springs, shimmed for LPG on the exhaust, new coils and spark plugs. Basically a full engine block up rebuild. Still cost me $7.5k, but she should be good for the next 20yrs I think.
Got her back last weekend, and put on 1000km in the first few days. Its so nice to have it back and I'm glad I spent thr $11k rather than spend $11k on a boring souless ute.
And I swear its got at least 10 more horsepower... Ive gotta believe that!
Did the flush 2 weeks ago and today i replaced power steering reservoir and double clamped the hoses back on. Pretty i sure it had a hairline crack in it from careless wrenching around it while doing suspension work previously. The long protruding nipples from the reservoir are great for fitting hoses but are also somewhat fragile.
Also, with the help of a friend, replaced the tensioner assembly - old one broke off on the body of the tensioner.
The baselining slowly progresses...
Also, with the help of a friend, replaced the tensioner assembly - old one broke off on the body of the tensioner.
The baselining slowly progresses...
Very rainy here today, so I got after a few easy jobs I wanted to get done.
07 LX - replaced the factory washer nozzles with the Duralast misting type. Big improvement. Also adjusted the driver side headlight alignment- it was pointed too far right.
00 LC - replaced the UBJ with new SPC 25002s. These had 90k miles on them, and probably could have gone quite a bit longer, but they were getting a bit of play, and given I go solo in the back country a fair amount, I’m cautious. Very easy job. Getting aligned as I type, but I’d guess it’s good to go.
07 LX - replaced the factory washer nozzles with the Duralast misting type. Big improvement. Also adjusted the driver side headlight alignment- it was pointed too far right.
00 LC - replaced the UBJ with new SPC 25002s. These had 90k miles on them, and probably could have gone quite a bit longer, but they were getting a bit of play, and given I go solo in the back country a fair amount, I’m cautious. Very easy job. Getting aligned as I type, but I’d guess it’s good to go.
1999WhitePearl
SILVER Star
Parking (Emergency) Brakes…
Job, but I can’t stand it Lol. Also putting on some DBA rotors and pads
Job, but I can’t stand it Lol. Also putting on some DBA rotors and padsNice, so while you guys fixed things up, I had some fun: Hollister SVRA.
Regarding “full compression” see pic 4 ^^
Regarding “full compression” see pic 4 ^^
Installed ARB compressor and 9100, doing a little work each evening for the past couple of weeks. I used the Slee 2nd battery tray for the SaftyHub 150, and a leftover piece of aluminum from another mounting kit, to mount the junction box for the switch leads. The 9100 is mounted to the insider fender. I originally had the wire for dimming the switch panel going inside the cab, but I drive with my lights on a lot, and didn't want it dimmed in the daytime. Since I wasn’t going to use all of the switches, I ran the dimming wire through switch #1, so I can adjust the dimming manually.
37’s making those 18’s look like 16’s
Any more pics? Looks mean.
