Same here on my 04.
When we're camping and trying to keep bugs out, I just close the hatch lock mechanism with a small carabiner. It shuts off all the dome lights. I even have one of those nifty red "remove before flight" tags hanging off it.
What have you done to your 100 Series this week? (31 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
When we're camping and trying to keep bugs out, I just close the hatch lock mechanism with a small carabiner. It shuts off all the dome lights. I even have one of those nifty red "remove before flight" tags hanging off it.
Outsane
Supporting Vendor
I found out that the leather shift knob cover I had made fits on the 100 series.
Available in black or brown.
solvefunction.com
Available in black or brown.
Leather Shift knob cover for Landcruiser
Leather Shift knob cover for Landcruiser, handmade here in the USA, These are designed to be easily installed in less then 5 min, Simply hold down the brake and move the lever all the way back and lace like a pair of good sneakers Available in Black or Tan Custom colors and available by request
solvefunction.com
Took advantage of the BFS and got myself an added insurance policy.
Tapped it at the 12V source in the overhead console using the 12V to 5V converter module. What’s interesting about this 12V source is key in or out when the engine is Off, that source powers On and has a a 15 minute delay hence powering the dashcam for an extended time and may/can capture additional useful footage. I highly recommend this setup.
Tapped it at the 12V source in the overhead console using the 12V to 5V converter module. What’s interesting about this 12V source is key in or out when the engine is Off, that source powers On and has a a 15 minute delay hence powering the dashcam for an extended time and may/can capture additional useful footage. I highly recommend this setup.
trdcorolla
SILVER Star
I push a carabiner into the hatch latch to make it think it's closed.
I put a grommet on the switch cuz i made the hole too big
. I taped the connectors.
I saw that on Ig. Lx_plore posted a video someone did that. Is when i knew to also use that method. After a couple slams of o**** later
and bored w stuff laying around I figuered add the switch.trdcorolla
SILVER Star
Haha, I have a bright orange floating keychain connected to my carabiner as a visual reminder that it's there.I saw that on Ig. Lx_plore posted a video someone did that. Is when i knew to also use that method. After a couple slams of os*** later
Outsane
Supporting Vendor
Even with a flag I kept slamming the carabiner too... I am not that bright right before bed... (or any time really)
Get out of the 100 section you 80 series guy lol @OutsaneI found out that the leather shift knob cover I had made fits on the 100 series.
View attachment 2853684
Available in black or brown.
Leather Shift knob cover for Landcruiser
Leather Shift knob cover for Landcruiser, handmade here in the USA, These are designed to be easily installed in less then 5 min, Simply hold down the brake and move the lever all the way back and lace like a pair of good sneakers Available in Black or Tan Custom colors and available by request
Outsane
Supporting Vendor
Any noticeable performance change?
just cos u have 80 series cup holder doesn't make u LC owner
Outsane
Supporting Vendor
Nope just a lowly Lexus owner...
What’s the best axle seal puller tool for our 100?
Lol
Lol
I have one like that from Advance Auto. Well worn from over a decade of use on Nissans. It's like the stubby JIS driver that I keep around. Sometimes it just fits the crazy place where I need to use it.
I’m curious what your trick was to releasing the housing from the lower clip. Or is there a lower screw. I’m trying to replace the left turn signal bulb and cannot figure out how to remove the assembly.
There is a clip that holds the turn signal housing to the head light housing. It’s kind of hidden but accessible.
hewitttech
SAIS Bypass Kit
If you don't get a response here from me please email or call us directly.
Got the extender from LandcruiserPhil
I also replaced my terminals, replaced the ground wire, and extended the negative wire. Still need to route it better/not have it draped over the fuse box, but at least I have some more wiggle room.
Now I just need to find AHC fluid because I have brand new globes sitting in the garage!
I also replaced my terminals, replaced the ground wire, and extended the negative wire. Still need to route it better/not have it draped over the fuse box, but at least I have some more wiggle room.
Now I just need to find AHC fluid because I have brand new globes sitting in the garage!
I like that terminal. What brand is that?
I think I'd be in trouble with that long shift lever. It would probably be more tempting for one of my kids to pull it while driving at highway speed.
