What goes here? Clutch slave clip

Joined
Jan 17, 2010
Messages
48
Location
Norman, OK
On my '77 there's a wonderful clip on the end of the clutch slave cylinder bracket. What goes inside the clip?

clipy.jpg
 

mrboatman

GOLD Star
Joined
Oct 21, 2016
Messages
1,542
Location
Southern Nevada
Maybe the ground cable from the starter to the frame could loop thru their.
 

Skreddy

SILVER Star
Joined
Feb 3, 2020
Messages
1,771
Location
Stanwood, WA
What about the emergency brake cable running from the transfer case to the firewall/dash?
I think it’s the wrong side for that. I believe this pic is looking from the underside up and is on the starter side. Parking cable should go down driver side (through a similar keeper). That was the same thing I thought at first.
 

middlecalf

SILVER Star
Joined
Jul 20, 2004
Messages
4,711
Location
Sweet, Idaho
If that’s a bracket from a slave cylinder setup that was on the driver’s side that could still be for the e-brake cable, maybe that’s why we don’t see the cable in the pic. ???
 

Bear

SILVER Star
Joined
Nov 2, 2005
Messages
2,970
Location
California
The same bracket appears on my '83 ROW clutch slave, with the RH cowl vent drain tube clamped in it. Look up #90461-10122. Despite later models of the FJ40s exported to the US after 1/75 not having the cowl vent, ROW models continued it, with the tubing exiting the upper area of the later-style welded tunnel; sometimes bracketry still showed up on other models un-needed.




IMG_0727.jpeg
 

Users who are viewing this thread

Top Bottom