What did you do to your pig today? (4 Viewers)

[Brewtus]

I attached the trailer to the '70, and put it to work.

Took the Trials bikes out for a practice, and used the pig as the tow rig. Met up with a friend of ours and fellow Trials competitor Chuck Sutton who brought his 4X4 Toyota mini-truck. Must have been a day for blue Toyotas and Montesa Trials bikes.

The wife yapping with yet another Trials member afterward. He brought an Isuzu, evidently not getting the memo about blue Toyota's...

Good friends, good practice, good day!

 

[nuclearlemon]

i got the welding on the roof done...what a pita! need to do a cleaner job smoothing everything,, but needed to get the roof protected for winter since the snow might be flying tomorrow night so i did a quicky mopar paint job too. used ace rust stop safety blue and it's a close match to the ford engine blue that was on the pig already. will wet sand and apply second coat in the spring when it's nice out again. now onto the backside of the rockers so i can get the ipors welded on.

nice to see the roof blue like it should be.

 

[CarmMontana]

Man that pig has a great stance. What size tires are those?

 

[nuclearlemon]

Man that pig has a great stance. What size tires are those?

34x10.5

 

[Brewtus]

i got the welding on the roof done...what a pita! need to do a cleaner job smoothing everything,, but needed to get the roof protected for winter since the snow might be flying tomorrow night so i did a quicky mopar paint job too.

Alright, I'll bite. Mopar paint job???

 

[nuclearlemon]

Alright, I'll bite. Mopar paint job???

moparts: paint job on a budget!?

also known as the $50 paint job.

 

[laguna80]

Got a lot done today. Por-15 on the bed, then por-15 primer the cab. Put spray primer on the door welds, so that I can use some filler on them tomorrow. Reattached my visors and rearview mirror, got the dome light working (I used the switch from my FJ60, since the pigs was broken. I had to use my dremel to cut away some of the plastic to get it to fit.)

 

[Brewtus]

moparts: paint job on a budget!?

also known as the $50 paint job.

Sweet!

 

[deans87]

YouTube - coyote lake summer 2010

YouTube - coyote lake summer 2010 part 2

here i was on coyote lake trail near fresno having fun

 

[nuclearlemon]

made a great little bracket to mount a fuel pressure regulator in the blue pig (gotta love plasma) only to find out why some one just gave me the regulator...it leaks like a sieve.

 

[laguna80]

Bedliner is on. I feel like I just passed a major hurdle.

 

[laguna80]

Filled holes and seams with seam sealer. Taped off holes for painting tomorrow.

 

[uglyoinker]

Filled holes and seams with seam sealer. Taped off holes for painting tomorrow.

pictures?

 

[laguna80]

pictures?

Shoot I'll get some tomorrow! I'll take before and after shots of the roof and cab paint too. Oh ya, going to mac steel tomorrow to try to get 4x4 tube for the rear sill/body mounts and for the rocker replacements as well.

 

[LAMBCRUSHER]

I'm waiting for a profile of that truck, myselfcan't wait to see it.

 

[laguna80]

Went to macsteel and picked up a 4x4" 3/8 square tube for my rear sill/body mounts and rockers. Painted the roof and picked up an LED license plate light.

 

[Brewtus]

Woah! I gotta read your build thread!!

 

[LAMBCRUSHER]

Took a slow walk along side her up my drive way-at about 3 hundrid 50 rpm

 

[Gumby]

Fixed it just enough to go wheel the wee out of it this weekend.

then hauled it 150 miles.

It's sitting out in front of the bar/ hotel just waitin' now.

 

[LAMBCRUSHER]

Woah! I gotta read your build thread!!

YES you should! and soon, I'll have lo speed dsl, so I can enjoy ALL of the pictures!!! Good work, Man!